Grizzly T25227 owner manual Maintenance, Schedule, Cleaning, Daily Check

Page 16

SECTION 6: MAINTENANCE

!

Always DISCONNECT POWER before servicing, adjusting, or doing maintenance to reduce the risk of accidental injury or electrocution.

Never submerge tool in liquid or clean with flammable solvents. Electrocution or fire may result, causing serious injury or death.

Schedule

For optimum performance from your multi- tool, follow this maintenance schedule and refer to any specific instructions given in this section.

Daily Check:

Loose mounting bolts.

Worn switch.

Worn or damaged cord.

Any other unsafe condition.

Cleaning

Cleaning the Model T25227 is relatively easy and should be done daily to prevent build up of dust and resins.

Use an air hose or vacuum to remove excess wood chips and dust from the ven- tilation openings (see Figure 15).

Use a dry rag to wipe off the remaining dust and debris from the tool flange and any accessories used.

Ventilation

Opening

Figure 15. Ventilation opening.

-14-

T25227 (Mfg. since 09/13)

Image 16
Contents Model T25227 Oscillating multi-tool Page Table of Contents Before Operating This Power Tool SafetySafety Instructions for Power Tools T25227 Mfg. since 09/13 Additional Safety for Oscillating Tools Introduction SpecificationsForeword Contact Info Setup UnpackingInventoryAssembly To install tool accessoriesTest Run To test run multi-toolOperations To perform a typical operationSanding Tips for sandingTips for sawing/cutting Sawing/CuttingScrapingTips for scraping Accessories T25159-35⁄8 Sanding PadT25150-Carbide Grit Saw Blade T25156 2 Flexible ScraperMaintenance CleaningSchedule Daily CheckService TroubleshootingParts DescriptionWArranty