Grizzly T25227 owner manual Assembly, To install tool accessories

Assembly

The T25227 Oscillating Multi-Tool comes with several accessory tools for a variety of jobs. With the groove and rivet design, each accessory tool can be mounted in 12 different directions. Choose the most effective direction to complete the job con- sidering stability and safety.

Select the right accessory tool for the job. Prior to attaching, carefully inspect the accessory for cracks, chips or other dam- age. Do Not use tools that have been damaged.

To install tool accessories:

1.diSCONNECT TOOL FROM POWER!

2. Lay the multi-tool tool on a flat surface with the tool flange facing upward (see

Figure 3).

Spindle Flange Rivets

Figure 3. Flange rivets for aligning

accessory grooves.

3. Remove dust and debris from the cap screw, flanges, and accessories.

4. place the accessory of choice onto the tool flange at the desired direc- tion, aligning the rivets of the tool flange with the grooves of the acces- sory (see Figure 3).

5. put the accessory washer over the accessory tool (small for the sanding accessory or large for all other acces- sories), aligning the washer hole with the flange hole. Make sure the convex side of the washer is facing down.

6. using the provided 6mm hex wrench, firmly secure the accessory with the cap screw (see Figures 4-5).

Concave

AttachmentSide Down

Tool

Assembly

Order

Figure 4. Attachment tool assembly order.

Secured Accessory

Figure 5. Accessory secured to tool.

T25227 (Mfg. since 09/13) -7-