Oricom UHF2100 manual Call-Ring tone, Activating the Auto Channel Scan, Press the Call button

Page 15

Operation

Activating the Auto Channel Scan

Channel scan perform searches for active signals in an endless loop for all 40 channels, 38 CTCSS codes and all 83 DCS codes.

a. Press the MENU button 5 times, “SCAN” icon will display on LCD screen.

b. Press the UP or DOWN button to begin scanning channels when an active signal is detected, channel scan pauses on the active channel.

c. Press the MENU button six times, CTCSS flashes on the LCD screen press the UP or DOWN button to begin scanning the CTCSS from 1-38.

d. Press the MENU button seven times, DCS flashes on the LCD screen. Press the UP or DOWN button to begin scanning DCS code 1-83.

e. Press the PTT button to confirm your setting.

Vibrator and Call alert

Your radio can alert you to incoming signal by emitting an audible call tone and vibration signal.

Call-Ring tone

You can send a Call-ring tone to other radio users to give an alert that you want to communicate with them.

Press the CALL button

You will hear a ring tone for about two seconds; “TX” icon appears on the LCD screen. Any other units within the transmitting range and tuned to the same channel and sub- channel (if applicable) will hear the Call-ring tone.

15

Image 15
Contents Operating Instructions Page Table of contents Safety Information and Warnings Safety Information and WarningsCleaning and Care Removing the Belt Clip InstallationInstalling the Belt Clip Installing the BatteriesCharging the batteries Read these Safety Warnings before you charge the batteriesBattery meter Battery lifeImportant You need to charge the unit for 10-14 hours Don’t use the radio in the rain Important safety warningOperation Transmitting rangeOricom UHF2100 instructions LCD ScreenOricom UHF2100 instructions Changing Channels OperationOperation Turning the Unit ON/OFFSetting the Ctcss sub-channel Transmitting and Receiving Setting the DCS Advanced Digital CodeSetting the VOX Voice Activated Sensitivity Call-Ring tone Activating the Auto Channel ScanPress the Call button Operation Setting the Dual Watch Mode Setting the Repeater function Key Lock Auxiliary FeaturesSpecifications Specifications476.975 476.900476.925 476.950Ii Negligence on your part or misuse by you of the product Warranty information AustraliaCustomer support Australia

UHF2100 specifications

The Oricom UHF2100 is a compact yet powerful two-way radio designed specifically for use in challenging environments. Boasting a robust build, this unit is favored among outdoor enthusiasts, tradespeople, and emergency responders who require reliable communication in remote locations.

One of the standout features of the Oricom UHF2100 is its impressive range. Utilized with UHF technology, this radio provides clarity and consistency over considerable distances, making it suitable for both urban and rural applications. The device operates on standard UHF CB frequencies, allowing users to connect effortlessly with one another, whether they are navigating through dense forests or working on construction sites.

The UHF2100 is equipped with 80 channels, providing a broad spectrum for communication. Users can easily switch between channels to avoid interference and find a clear line of communication. It is also supported by the Australian CB radio network, ensuring compliance with regulations while guaranteeing optimal performance.

In terms of usability, the Oricom UHF2100 features a user-friendly interface with large, well-spaced buttons. This design consideration makes it simpler to operate, even under adverse weather conditions or while wearing gloves. The backlit LCD display is another significant advantage, offering visibility in low-light scenarios.

The battery life of the UHF2100 has been optimized to ensure extended use without frequent recharges. The device runs on a rechargeable lithium-ion battery, which not only ensures longevity but also features a quick charging capability. This characteristic is especially important for users who are on the move and require a radio that can keep up with their demands.

Additionally, the Oricom UHF2100 is IP67 rated, making it dustproof and water-resistant. This ruggedness allows it to withstand harsh conditions, whether it’s being used in the rain or sandy environments where traditional radios might become damaged.

The inclusion of a built-in noise-cancellation microphone is another technological highlight, which ensures clear audio quality by filtering out background noise. This feature is crucial in noisy environments, enabling effective communication without straining to hear.

In summary, the Oricom UHF2100 is a versatile, durable, and feature-rich two-way radio that exceeds the expectations of both casual users and professionals. With its array of channels, user-friendly design, robust build and advanced technologies, it stands out as an excellent choice for reliable communication in various situations.