Oricom UHF2100 manual Setting the Repeater function

Page 18

Operation

the repeater access for these specific Channels. When activated, your radio will receive the Repeater on its specific channel (all repeater outputs are on channel 1 to 8) but transmits to the repeater channel 31 through 38. So, if you are in the range of a local repeater which transmits on channel 2, after setting your radio to allow access of the repeater on that channel, you will select channel 2 as normal, but during transmit operation your radio will automatically transmit to the repeater on channel 32.

Setting the Repeater function

a. Press the Menu button 13 times, “RPT” icon will be displayed and flashing on the LCD screen.

b. Press the UP or DOWN button to set the Repeat function to On or Off.

c. Press the PTT button to confirm your setting.

18

Image 18
Contents Operating Instructions Page Table of contents Safety Information and Warnings Safety Information and WarningsCleaning and Care Installing the Batteries InstallationInstalling the Belt Clip Removing the Belt ClipRead these Safety Warnings before you charge the batteries Charging the batteriesBattery meter Battery lifeImportant You need to charge the unit for 10-14 hours Transmitting range Important safety warningOperation Don’t use the radio in the rainOricom UHF2100 instructions LCD ScreenOricom UHF2100 instructions Turning the Unit ON/OFF OperationOperation Changing ChannelsSetting the Ctcss sub-channel Setting the DCS Advanced Digital Code Transmitting and ReceivingSetting the VOX Voice Activated Sensitivity Call-Ring tone Activating the Auto Channel ScanPress the Call button Operation Setting the Dual Watch Mode Setting the Repeater function Auxiliary Features Key LockSpecifications Specifications476.950 476.900476.925 476.975Warranty information Australia Ii Negligence on your part or misuse by you of the productCustomer support Australia

UHF2100 specifications

The Oricom UHF2100 is a compact yet powerful two-way radio designed specifically for use in challenging environments. Boasting a robust build, this unit is favored among outdoor enthusiasts, tradespeople, and emergency responders who require reliable communication in remote locations.

One of the standout features of the Oricom UHF2100 is its impressive range. Utilized with UHF technology, this radio provides clarity and consistency over considerable distances, making it suitable for both urban and rural applications. The device operates on standard UHF CB frequencies, allowing users to connect effortlessly with one another, whether they are navigating through dense forests or working on construction sites.

The UHF2100 is equipped with 80 channels, providing a broad spectrum for communication. Users can easily switch between channels to avoid interference and find a clear line of communication. It is also supported by the Australian CB radio network, ensuring compliance with regulations while guaranteeing optimal performance.

In terms of usability, the Oricom UHF2100 features a user-friendly interface with large, well-spaced buttons. This design consideration makes it simpler to operate, even under adverse weather conditions or while wearing gloves. The backlit LCD display is another significant advantage, offering visibility in low-light scenarios.

The battery life of the UHF2100 has been optimized to ensure extended use without frequent recharges. The device runs on a rechargeable lithium-ion battery, which not only ensures longevity but also features a quick charging capability. This characteristic is especially important for users who are on the move and require a radio that can keep up with their demands.

Additionally, the Oricom UHF2100 is IP67 rated, making it dustproof and water-resistant. This ruggedness allows it to withstand harsh conditions, whether it’s being used in the rain or sandy environments where traditional radios might become damaged.

The inclusion of a built-in noise-cancellation microphone is another technological highlight, which ensures clear audio quality by filtering out background noise. This feature is crucial in noisy environments, enabling effective communication without straining to hear.

In summary, the Oricom UHF2100 is a versatile, durable, and feature-rich two-way radio that exceeds the expectations of both casual users and professionals. With its array of channels, user-friendly design, robust build and advanced technologies, it stands out as an excellent choice for reliable communication in various situations.