Technical Information, Installation Notes, 856-H2

TEA-FOR-TWOTM

Technical Information

Fixture*:	Basin area		Top area			Weight
Bathing	45″ (114.3 cm)		58″ (147.3 cm)			510 lbs
well	x 25″ (63.5 cm)		x 29″ (73.7 cm)			(231.3 kg)
Water depth			Capacity
19-1/2″(27.3 cm)			105 gal (397.5 L)
* Approximate measurements for comparison only.


Pump		Heater		V	A*
1.5 hp		1.5 kW		240	11

* Approximate measurements for comparison only.

Required Electrical Service

Dedicated circuit required, protected with Class A Ground-Fault Circuit-Interrupter (GFCI) or Earth-Leakage Circut-Breaker (ELCB):

Pump/control	208-240 V, 20 A, 50/60 Hz

Installation Notes

Install this product according to the installation guide.

Floor support under the whirlpool must provide for a minimum of 2000 lbs (907.2 kg) loading.

Cast iron whirlpools are extremely heavy, making some drop-in installations difficult. Splitting the deck/surround is recommended if installing into a deck.

A pump/control access panel is required.

For a drop-in installation, the cut-out dimension is 64-1/2″(163.8 cm) x 34-1/2″(87.6 cm).

For an undermount installation, the K-587 template is required.

The hot water supply should be 70% of capacity or greater. Installations will vary.

K-856-H2

18"

(45.7 cm)

15-7/8" (40.3 cm)

66" (167.6 cm)

4-3/16"

(10.6 cm)

2-7/8" (7.3 cm) 1/2" (1.3 cm) 3" (7.6 cm)

No change in measurements if connected with drain illustrated. (K-7147-AF or K-7147M-AF)

Pump/Control Access

34" (86.4 cm) x 15" (38.1 cm)

	3/4"	36" (91.4 cm)
	(1.9 cm)	36" (91.4 cm)
	(1.9 cm)

24"

(61 cm)

1-1/2" OD

Product Diagram

TEA-FOR-TWOTM5.5' BATH WHIRLPOOL

Page 2 of 2

1019482-4-E