Kohler K-922/K-923 manual Install the Spout Wall Installation

Page 7

3/8" (1 cm)

Valve Outlet Tubing

1x3

Pipe Strap

4"

(10.2 cm)

Intake

2x4

Pipe

 

Spout

Assembly

7-5/8"

(19.4 cm)

4. Install the Spout – Wall Installation

Install a 2x4 for spout support so it lays flush against the top support of the drip tray. If the drip tray is installed, the spout center must be 7-5/8″ (19.4 cm) from the drip tray mounting studs. If the drip tray is not installed, the spout center must be 14-16″ (35.6-40.6 cm) from the deck of the bathing fixture.

NOTE: When 2x6 wall studs are present, the front of the 2x4 must be flush with the front of the wall stud.

Install a 1x3 so it is 4″ (10.2 cm) above the 2x4 and inset 3/8″ (1 cm) from the back of the studs. The larger side of the 1x3 must face outward.

NOTE: When 2x6 wall studs are present, install the 1x3 so it is 2-3/8″ (6 cm) from the back of the wall stud.

Place the spout assembly into position. Verify that the spout and drip tray mounting plate (if installed) are centered.

Remove the boot cap from the end of the intake pipe.

Remove the mounting sleeve and cartridge.

Kohler Co.

7

1006741-2-G

Image 7
Contents Installation Guide Before You Begin Tools and MaterialsPlus Before You Begin Center Installation Offset InstallationDetermine the Location Ceiling Installation Layout Stud Install the Drip Tray Mounting PlateInstall the Spout Wall Installation Install the Spout Wall Installation Install the Spout Ceiling Installation Complete the Installation Assemble the Spout Install the Drip Tray and Screen Avant de commencer Outils et matérielsAvant de commencer Installation excentrée Déterminer l’emplacementInstallation centrée Plan d’installation au plafond Installer la plaque de fixation d’égouttement Installer le bec Installation murale Installer le bec Installation murale Installer le bec Installation au plafond Compléter l’installation Assembler le bec Installer le récipient d’égouttement et le tamis Antes de comenzar Herramientas y materialesMás Antes de comenzar Instalación descentrada Determine el lugar de instalaciónInstalación centrada Disposición de la instalación al techo Instale la placa de montaje de la bandeja de goteo Instale la placa de montaje de la bandeja de goteo Instale el surtidor Instalación a la pared Instale el surtidor Instalación a la pared Instale el surtidor Instalación al techo Añada sellador en la ranura Termine la instalaciónEnsamble el surtidor Instale la bandeja de goteo y la rejilla Kohler Co

K-922/K-923 specifications

Kohler has long been synonymous with quality and innovation in bathroom and kitchen fixtures, and the K-922 and K-923 are prime examples of their commitment to excellence. These two models represent a blend of contemporary design and functional efficiency, catering to the modern consumer's needs.

The Kohler K-922 and K-923 are elegantly designed bathroom sink faucets that focus on enhancing usability while providing a chic look. Both models come with a mixed metal finish, showcasing an upscale appearance that can seamlessly integrate into various bathroom styles. The signature curve of these faucets not only adds to their aesthetic appeal but also facilitates an easy grip for effortless operation.

One of the standout features of the K-922 and K-923 is the use of a high-arch spout design, which allows for increased clearance and easy sink access. This design is particularly beneficial for tasks such as filling large containers or washing hands comfortably. Additionally, the faucets are equipped with a single-lever handle for precise control over water flow and temperature, promoting user convenience.

The technology embedded in the K-922 and K-923 models is nothing short of impressive. They incorporate Kohler’s advanced ceramic disc valve technology, which ensures a drip-free performance and longevity. This innovation not only enhances reliability but also minimizes maintenance, appealing to users seeking durability in their plumbing fixtures.

Moreover, both models feature WaterSense certification, promoting water conservation without compromising performance. This makes the K-922 and K-923 environmentally friendly options that still provide excellent functionality. The flow rate is optimized to reduce water usage, allowing homeowners to save on their utility bills while being environmentally responsible.

Installation is also made simpler with the K-922 and K-923, as they come with pre-assembled components and clear instructions, reducing the time and effort required for setup. Their universal design means they'll fit most standard sink configurations, making them versatile choices for a range of home renovations.

In summary, the Kohler K-922 and K-923 faucets stand out for their visually appealing design, advanced water management technology, and user-friendly features. They exemplify Kohler's dedication to providing products that meet the demands of modern households while prioritizing sustainability and ease of use. Choosing one of these faucets ensures that customers receive a high-quality, reliable fixture that complements their home's aesthetics and functionality.