on the monitor | and restore the image on the screen. |
blinking at 1 second |
|
intervals? | If there is still no image, press the 'SOURCE' button. |
| Then press any key on the keyboard again to activate |
| the monitor and restore the image on the screen. |
I cannot see the On | Have you locked the |
Screen Display. | On Screen Display |
| (OSD) Menu to |
| prevent changes? |
Unlock the OSD by pressing the [
] button for at least 5 seconds.
The screen shows strange colors or just black and white.
Is the screen displaying only one color as if looking at the screen through a cellophane paper?
Have the screen colors become strange after running a program or due to a crash between applications?
Check the signal cable connection.
Make sure the video card is fully inserted in it's slot.
Reboot the computer.
| Has the video card | Set the video card by referring to the video card |
| been set properly? | manual. |
The screen | Have you changed | Adjust screen image position and size using the OSD. |
suddenly has | the video card or the |
|
become | driver? |
|
unbalanced. |
|
|
| Have you adjusted | Adjust the resolution and frequency at the video card. |
| the resolution or | (Refer to the Preset Timing Modes). |
| frequency to the |
|
| monitor? |
|
The screen can be unbalanced due to the cycle of the video card signals.
Readjust Position by referring to the OSD.
The screen is out of | Have you adjusted |
focus or OSD | the resolution or |
cannot be adjusted. | frequency on the |
| monitor? |
LED is blinking but | Is the frequency |
no images on the | properly adjusted |
screen. | when checking the |
| Display Timing on |
| the menu? |
There are only 16 | Have the Windows |
colors shown on the | colors been set |
screen. The screen | properly? |
colors have |
|
changed after |
|
changing the video |
|
card. |
|
| Has the video card |
| been set properly? |
Adjust the resolution and frequency of the video card. (Refer to the Preset Timing Modes).
Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes.
( The maximum frequency per resolution may differ from product to product. )
Windows XP :
Set the resolution at the Control Panel → Appearance and Themes → Display → Settings.
Windows ME/2000 :
Set the resolution at the Control Panel → Display → Settings.
Set the video card by referring to the video card manual.
There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor found".
Have you installed the monitor driver?
See the video card manual to see if the Plug & Play (VESA DDC) function can be supported.
Install the monitor driver according to the Driver Installation Instructions.
Install the monitor driver according to the Driver Installation Instructions.