User’s Manual
Setup
Connecting Your Monitor (SyncMaster 171T)
Setup-General
1.Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.
2.Connect the signal cable to the
3.Connect the DVI Cable to the DVI Port on the back of your Monitor.
4.Connect the monitor to the Macintosh computer using the
5.In the case of an old model Macintosh, you need to connect the monitor using a special Mac adaptor.
6.Turn on your computer and monitor. If your monitor displays an image, installation is complete.