Samsung LF19PPBCB/EN, LF24PPBCB/EN, LF24PPBDB/EN Monitor Self-Diagnosis, Before Requesting Service

Page 60

5 Troubleshooting

5-1 Monitor Self-Diagnosis

You can check if the product is working properly using the Self-Diagnosis function.

If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform the self-diagnosis function according to the procedures below.

1.Turn the product and the PC off.

2.Separate the signal cable from the product .

3.Turn the product on.

4.If the product is working properly, the <Check Signal Cable> message appears.

In this case, if a blank screen is displayed again, make sure that there is no problem with the PC and the connection. The product is working properly.

5-2 Before Requesting Service

Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest Samsung Electronics Service Center.

A blank screen appears / I cannot turn the product on

Is the power cord connected properly?

Check the connection status of the power cord.

 

 

Is the <Check Signal Cable> message displayed on the

Check the cable connecting the PC and the product.

screen?

If the message appears on the screen even if the cable is

 

 

properly connected, recheck the input signal by pressing the

 

/SOURCE button of the product.

 

 

Is the <Not Optimum Mode> message displayed on the

This occurs when the signal from the graphics card exceeds

screen?

the maximum resolution or the maximum frequency of the

 

product.

 

In this case, set up the appropriate resolution and the fre-

 

quency for the product.

 

 

Is a blank screen displayed and does the power LED blink at

This occurs when the power saving function is running.

a 1 second interval?

If you click the mouse or press any key, the screen will be

 

 

turned on.

 

 

The buttons on the monitor are not functioning.

Is the key lock mode enabled?

Disable the key lock mode if it is enabled.

The color is weird / The picture is displayed in black and white

Is the entire screen displayed in the same color as if viewing

Check the cable connection to the computer.

the screen through a cellophane paper?

Reinsert the graphics card into the computer completely.

 

 

Check if the <Color Effect> is set to <Off>.

 

 

Is the graphics card configured correctly?

Set up the graphics card referring to the user manual.

 

 

Troubleshooting

5-1

Image 60
Contents LCD Monitor Table Of Contents Using this Manual Before You StartIcons used in this manual Copyright NoticeCare and Maintenance External Surface and Screen MaintenanceSafety Precautions Icons used for safety precautionsPower Related Meaning of SignsInstallation Related Otherwise, it may result in fireCleaning Related Usage Related Page Maintaining the Correct Posture when Using this Product Installing the Product Package ContentsInstalling the Stand Do not remove the stopper pin before installing the baseDisassembly is in the reverse order of assembly Installing a Wall Mount Page Connecting to your Network Connecting Power Connecting to another Monitor Connecting with a PC Connecting a Stereo Cable Connecting USB Connecting Headphones Connecting MIC Kensington Lock Locking the productUsing the product What is a PC over IP?Connect to the host PC using a LAN cable Host PC Hub LAN Cable MonitorPlug & Play Standard Signal Mode Table Horizontal Frequency Installing the Device Driver Product Operating Buttons Product Operating ButtonsUsing the Screen Adjustment Menu OSD On Screen Display Top Menus Sub MenusColor Size & Position SETUP&RESET Information PCoIP On Screen Display OSDConnect Screen Connect ButtonOSD Connect Screen Connecting OSD Options MenuConfiguration Window Network TabLabel Tab Connection Management Tab Method Data FieldsDiscovery Tab Session TabSession Type Peer Identity Method Data Fields CommentLanguage Tab OSD Tab LanguageKeyboard Layout Screen-Saver MessageReset Tab Screen-Saver TimeoutReset Parameters VMware View TabDiagnostics Window Event Log TabSession Statistics Tab View event log messagePCoIP Processor Tab Ping TabPCoIP Packets Statistics Bytes StatisticsPing Settings Information WindowPackets User Settings Window VPD InformationMouse Tab Keyboard Tab Password Window Image23 Authorized Password Reset Installing the Software What is Natural Color? Natural ColorWhat is MagicTune? Installing the SoftwareRestrictions and Problems with the Installation MagicTune MagicTuneRemoving the Software What is MultiScreen ? Restrictions and Problems with the Installation MultiScreenMultiScreen Operating SystemBefore Requesting Service Monitor Self-DiagnosisDisplay area suddenly moves to an edge or to the center FAQ FAQSpecifications Model NameUSA only Power Saving Function Power OFF State Normal Operation Mechanical Switch Stand byContact Samsung Worldwide North AmericaLatin America EuropeDenmark CIS Asia PacificMiddle East AfricaResponsibility for the Pay Service Cost to Customers Product damage caused by customers faultNot a product defect Others
Related manuals
Manual 2 pages 21.72 Kb Manual 74 pages 24.91 Kb Manual 70 pages 56.65 Kb Manual 73 pages 13.29 Kb Manual 72 pages 3.42 Kb Manual 71 pages 51.27 Kb Manual 72 pages 37.28 Kb Manual 71 pages 34.51 Kb Manual 71 pages 39.26 Kb Manual 76 pages 2.48 Kb Manual 72 pages 52.08 Kb Manual 72 pages 37.92 Kb Manual 68 pages 62.62 Kb Manual 72 pages 63.81 Kb

LF24PPBCB/ZA, LF19PPBCB/XY, LF24PPBCB/EN, LF24PPBCB/XJ, LF19PPBCB/XJ specifications

The Samsung LF24PPBCB/XY and LF19PPBCB/XY are innovative display monitors designed to enhance productivity and provide an exceptional viewing experience. Both models are part of Samsung's commitment to excellence in visual technology, making them suitable for various applications, including business, educational, and personal use.

Starting with the LF24PPBCB/XY, this 24-inch Full HD monitor delivers stunning visuals with a resolution of 1920 x 1080 pixels. Its IPS (In-Plane Switching) technology ensures wide viewing angles up to 178 degrees, allowing for consistent color accuracy and brightness levels from different perspectives. This feature is particularly beneficial in collaborative environments where multiple users view the screen simultaneously.

In terms of design, the LF24PPBCB/XY adopts a sleek and minimalist aesthetic, making it an attractive addition to any workspace. It is equipped with Samsung's borderless display technology, reducing distractions and maximizing screen real estate. The ultra-slim profile and VESA mount compatibility enhance its versatility, allowing users to customize their setups according to their preferences.

The LF19PPBCB/XY, on the other hand, is a compact 19-inch monitor that doesn’t compromise on performance. It also features Full HD resolution, making it an excellent choice for smaller workspaces or for use as a secondary display. The monitor's compact design is paired with an Energy Star certification, underscoring Samsung's commitment to environmental responsibility by ensuring energy efficiency without sacrificing performance.

Both models include useful technologies such as Flicker-Free and Eye Saver Mode, which significantly reduce eye strain during prolonged use. These features are particularly important for users who engage in long hours of work, gaming, or multimedia consumption.

Connectivity options on both monitors are versatile, including HDMI, DisplayPort, and VGA ports, making them compatible with a wide range of devices. This flexibility ensures that users can easily connect laptops, desktops, or even gaming consoles without hassle.

Additionally, Samsung’s advanced picture quality technologies, such as Game Mode and Dynamic Contrast Ratio, allow users to enjoy vibrant visuals with enhanced detail, whether for gaming or video playback.

In summary, the Samsung LF24PPBCB/XY and LF19PPBCB/XY monitors are designed to meet the demands of modern users, providing high-quality visuals, ergonomic features, and energy efficiency. They represent a perfect merger of style, functionality, and innovation in display technology.