Samsung LF19PPBCB/EN, LF24PPBCB/EN, LF24PPBDB/EN, LF24PPBDB/XJ Configuration Window, Network Tab

<Configuration> Window

The <Configuration> window allows the administrator to access window tabs with settings that define how the Portal operates and interacts with its environment.

The tabs in the <Configuration> window are:

•<Network>

•<Label>

•<Connection Management>

•<Discovery>

•<Session>

•<RDP>

•<Language>

•<OSD>

•<Reset>

•<VMware View>

Each tab has <OK>, <Cancel>, and <Apply> buttons that allow the administrator to accept or cancel the setting changes made on the tab.

Some PCoIP devices have password protection disabled and do not require a password to login into the administration webpages or access the OSD parameters. Password protection for the Log In page and OSD can be enabled through PCoIP Management Console.

<Network> Tab

The <Network> tab allows an administrator to set the Portal network parameters.

The Network parameters can also be configured using the Webpage Administration Interface.

Figure 2-4:<Network> Configuration

•<Enable DHCP>

When <Enable DHCP> is enabled, the device will contact a DHCP server to be assigned an IP address, subnet mask, gateway IP address and DNS servers. When disabled, the device requires these parameters to be set manually.

•<IP Address>

The IP Address field is the device’s <IP address>. If DHCP is disabled, this field is required. If DHCP is enabled, this field is not editable. This field must be a valid IP address, and if an invalid IP address is entered, the OSD will prompt the administrator to correct it.

•<Subnet Mask>

The <Subnet Mask> field is the device’s subnet mask. If DHCP is disabled, this field is required. If DHCP is enabled, this field is not editable. This field must be a valid subnet mask, if an invalid subnet mask is entered, the OSD will prompt the

4-1 Installing the Software