Introduction
The Color button and the PC/DVI/HDMI/DP selection button.
TTX/MIX
MTS/DUAL
In TV mode, these buttons can be used to configure a list of chan- nels.
You can select the PC, DVI, HDMI or DP(DisplayPort) external input directly in a mode other than TV mode.
TV channels provide written information services via teletext.
- Teletext Buttons
Note
This function does not work for this LCD Display.
MTS-
You can select MTS (Multichannel Television Stereo) mode.
| Audio Type | MTS/S_Mode | Default |
FM Stereo | Mono | Mono | Manual Change |
| Stereo | Mono ↔ Stereo |
|
| SAP | Mono ↔ SAP | Mono |
DUAL- |
|
|
|
ENTER/PRE-CH
MUTE
CH/P 
TV
STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM MONO/NICAM STEREO can be operated depending on the broadcasting type by using the DUAL button on the remote control while watching TV.
Note
Enabled when a TV tuner box is connected.
This button is used to return to the immediately previous channel.
Note
Enabled when a TV tuner box is connected.
Pauses (mutes) the audio output temporarily. This is displayed on the lower left corner of the screen. The audio comes back on if MUTE or - VOL + is pressed in the Mute mode.
In TV mode, selects TV channels.
Note
Enabled when a TV tuner box is connected.
Allows you to watch an analogue or digital TV.
Note
Enabled when a TV tuner box is connected.