Samsung LH46CRPMBD/XJ, LH46CRPMBD/EN, LH46CRPMBC/EN, LH40CRPMBD/EN manual Rear, Power indicator

Introduction

However, the picture may display abnormally if the connected external input signal is different from the selected video signal.

•MagicInfo can only be enabled when a network box is connected.

•A TV tuner box (sold separately) must be connected to use the TV. D.MENU button

Opens the on-screen D.MENU.

Note

The D.MENU button is activated when a TV tuner is connected and otherwise, the

PIP button is enabled.

PIP button

Push the PIP button to turn the PIP screen On / Off.

Power button []

Use this button for turning the LCD Display on and off.

Brightness Sensor

Automatically detects the surrounding brightness.

Power indicator

Shows PowerSaver mode by blinking green

Note

See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods.

Remote Control Sensor

Aim the remote control towards this spot on the LCD Display.

Rear

Note

See the "Connections" section for details about cable connections. The LCD Display's configuration at the back may vary slightly depending on the model.