Introduction
To lock the product, follow these steps:
1.Wrap the Kensington lock cable around a large, stationary object such as a desk or chair.
2.Slide the end of the cable with the lock at- tached through the looped end of the Ken- sington lock cable.
3.Insert the Kensington Lock into the security slot (
) on the back of the display.
4.Lock the lock (
).
Note
•These are general instructions. For exact in- structions, see the User Manual supplied with the locking device.
•You can purchase the locking device from an electronics store, an online shop, or our serv- ice Center.
Connecting a Network Box (sold separately)
RGB OUT
MagicInfo video output port
MAGICINFO OUT
This is the output terminal for the video, audio, and control signals of MagicInfo.
It can be used by connecting it to the [HDMI IN 2 (MAGICINFO)] terminal using an HDMI cable.
LAN (LAN Connection Terminal)
Connects to a LAN cable to allow Internet or net- work access in MagicInfo mode.
Connecting a Network Box (sold separately)
USB (USB Connection Terminal)
Keyboard / Mouse, Mass Storage Device Com- patible.
AUDIO OUT
Connect a headphone or an External speaker.
RS232C (RS232C Serial PORT)
Serial port