Cyclades PM IPDU Display, To delete the user rog, enter the following, Pmdeluser rog, Pmdisplay 2

40Cyclades PM IPDU Installer/Administrator/User Guide

Examples

To delete the user rog, enter the following.

pm>deluser rog

Username deleted.

display

The display command allows logical inversion of the 2-digit, 7-segment display. The purpose of this command is to allow a PM IPDU to be mounted upside-down. This command is available to the admin user only.

NOTE: The decimal point will be at the top of the display when the PM IPDU is mounted upside down.

Syntax

display [<IPDU#><IPDU_ID> [0180]]

-or-

display

Arguments

no argument show display status of all PM IPDUs in the daisy chain <IPDU#> number of the PM IPDU in the chain

<IPDU_ID> Identification string previously set by the id command

0normal mode (default)

180inverted display

Examples

To set the display if IPDU #2 to inverted mode, enter the following.

pm>display 2 180

IPDU #2: Display mode set to 180 degrees rotated.

To set the display of IPDU #1 to normal mode, enter the following.

pm>display 1 0

IPDU #1: Display mode set to normal.