Cyclades PM IPDU Help, To reset the factory defaults, enter the following, Pmfactorydefaults

42Cyclades PM IPDU Installer/Administrator/User Guide

Examples

To reset the factory defaults, enter the following.

pm>factory_defaults 1

Setting configuration to defaults on IPDU #1

1:Outlet turned on.

2:Outlet turned on.

3:Outlet turned on.

4:Outlet turned on.

5:Outlet turned on.

6:Outlet turned on.

7:Outlet turned on.

8:Outlet turned on.

Saving configuration to flash on IPDU #1 ... done.

help

The help command displays the system help message for all commands or for a single command when specified.

NOTE: When the admin user is logged in, the help command displays all commands. When a regular user is logged in, the help command displays only the regular user commands.

Syntax

<command> help

-or-

help

Arguments

<command> Any available command

Examples

To view the system help message for a specific command, enter the command followed by help.

pm>syslog help

Usage: syslog <onoffstatus>

Turn the syslog messages on the console on or off