Cyclades PM IPDU manual Default Configuration Parameters

23

CHAPTER

3

Configuration

The Cyclades PM IPDU may be configured by any one of three methods:

•Command Prompt - Full configuration capabilities.

•Browser - Available only when the PM IPDU is connected directly to an AUX port on a KVM switch or OnSite appliance or connected directly to a serial console port on an ACS console server, TS terminal server or OnSite appliance. This menu allows you to invoke the various PM IPDU operations, such as cycling, switching on, switching off and basic configurations of the power management session to communicate with the PM IPDU. Only a limited number of parameters may actually be changed and saved to the PM IPDU.

•Text-based menu - Available only when used in an integrated configuration. This menu allows you to invoke the various PM IPDU operations such as cycling, switching on, switching off and more.

The following sections offer basic instructions for configuring, restoring the admin password, and uploading firmware on the Cyclades PM IPDU for either the standalone or the daisy

chained configuration.

For information about integrated use with the Cyclades ACS console server, Cyclades TS terminal server, Cyclades KVM switch or the Cyclades OnSite appliance, refer to the documentation relevant to each product family.

Default Configuration Parameters

The Cyclades PM IPDU’s default configuration is as follows:

•User is admin.

•admin user’s password is pm8.

•All outlets are un-named.

•All outlets are unassigned to user.

•All outlets are turned on.

•All outlets are unlocked.