
Chapter 2: Installation | 17 |
|
|
•If you are mounting the PM IPDU, obtain a Phillips screwdriver and appropriate nuts and bolts before starting the following procedure.
NOTE: When mounting a Cyclades PM IPDU zero U model to a wall stud, securely mount it by using a #10 or larger screw or use a drywall fastener rated min. 25 lb. (11.34 kg).
The following graphics depict the orientation of the brackets for front rack mounting PM IPDU.
Bracket
Figure 2.1: Rack Mounting a Cyclades PM10 IPDU, PM10l IPDU and PM8iIPDU
Installation environment
When installing the PM IPDU, ensure that the following environment specifications are met.
Table 2.6: PM IPDU Optimum Installation Environment
Environment Factor | Recommendation |
|
|
Temperature | The manufacturer's maximum recommended ambient temperature for the |
| Cyclades PM IPDU is 122 ºF (50 ºC). |
|
|
Elevated Operating Ambient | If the Cyclades PM IPDU is installed in a closed or |
Temperature | the operating ambient temperature of the rack environment may be greater |
| than room ambient temperature. Therefore, consideration should be given |
| to installing the equipment in an environment compatible with the |
| manufacturer’s maximum rated ambient temperature. See above. |
|
|
Reduced Air Flow | Installation of the equipment in a rack should be such that the amount of air |
| flow required for safe operation of the equipment is not compromised. |
|
|
Mechanical Loading | Mounting of the equipment in the rack should be such that a hazardous |
| condition is not achieved due to uneven mechanical loading. |
|
|
Circuit Overloading | Consideration should be given to the connection of the equipment to the |
| supply circuit and the effect that overloading of circuits might have on |
| overcurrent protection and supply wiring. Appropriate consideration of |
| equipment nameplate ratings should be used when addressing |
| this concern. |
|
|