Cyclades PM IPDU manual Modular input power cables for the PM Ipdu, Connector on

14Cyclades PM IPDU Installer/Administrator/User Guide

Table 2.1: PM IPDU Shipping Box Contents, Part Numbers and Description (Continued)

P/N	Description	Purpose
CON0132	RJ-45 loopback connector	In case the administrator forgets the admin's
		password, this is used to place in the OUT port to gain
		temporary access to the box using the factory default
		password.
		See To reset the admin password using the loopback
		connector: on page 25.

210105	PM IPDU to DSR switch cable
	adaptor

Used to connect Cyclades PM IPDU to an Avocent DSR switch.

HAR0220 2 mounting brackets with 8 screws (2 spares). For PM10 IPDU and PM10i IPDU

Use to mount the Cyclades PM10 IPDU and PM10i IPDU to a rack or wall. See To mount the Cyclades PM8i IPDU, PM10 IPDU or PM10i IPDU: on page 18.

HAR0302 2 mounting brackets with 5 screws (1 spare). For PM8i IPDU

Use to mount the Cyclades PM8i IPDU to a rack or wall. See To mount the Cyclades PM8i IPDU, PM10 IPDU or PM10i IPDU: on page 18.

See the following section for a list of power cables shipped with specific PM IPDU models.

Modular input power cables for the PM IPDU

If your PM IPDU model does not have a fixed power input cable, it may ship with one of the modular cables listed in the following sections. Depending on your site’s location, the modular input power cables included in the box vary. See the following sections to find the input cable that should ship with your PM IPDU product:

•PM8i-10A IPDU and PM10i-10A IPDU power cables on page 15

•PM10i-15A IPDU power cables on page 16

•PM10i-16A IPDU and PM 20i-16A IPDU power cables on page 16

NOTE: The Cyclades PM 10i-32Au IPDU ships with an unterminated power cord. If necessary, your Cyclades representative may provide guidelines on approved power plug installation.