Cyclades PM IPDU manual To log into the PM Ipdu through the console in port

22Cyclades PM IPDU Installer/Administrator/User Guide

To log into the PM IPDU through the console (IN port):

From your terminal emulation application, log into the console port as admin.

AlterPath PM

Copyright (c) 2002-2006 Avocent Corporation

V 1.9.0 Jun 21, 2006

[PM]: IPDU: 1

[PM]: OUT: 10

Username: admin

The default password is pm8. If the password has been changed from the default, use the new password.

If this is a first-time installation, see Initial Configuration Using the Command Prompt on page 24 for instructions on changing the default password, adding users, and assigning outlets to users.

See Command Line Interface on page 31, for procedures on logging in and using the console commands to manage power on connected devices.