58 Cyclades PM IPDU Installer/Administrator/User Guide
upgrade
The upgrade command is available only to the administrator. This command goes directly to the
boot options menu before actually rebooting. You may either upgrade or boot the firmware.
NOTE: For details on upgrading using the upgrade command or using the reboot command, see Upgrading the
Cyclades PM IPDU Firmware on page 26.
Syntax
upgrade <IPDU#>|<IPDU_ID>
Arguments
<IPDU#> IPDU number in a daisy chain
<IPDU_ID> Identification string previously set by the id command
NOTE: If you wish to upgrade more than one IPDU, it is recommended that you upgrade the most remote
IPDU first.