Cyclades PM IPDU manual Humidity, Pmhelp

Chapter 4: Command Line Interface 43

To view the system help message for all commands, enter the following.

pm>help
Available commands:
adduser	alarm	assign
buzzer	current	currentprotection
currseg	cycle	dbsync
deluser	display	exit
factory_defaults	help	hwocp
humidity	id	interval
list	lock	name
off	on	passwd
reboot	restore	save
status	syslog	temperature
unassign	unlock	upgrade
ver	voltage	whoami

NOTE: To get detailed help on the commands listed above type '<command> help';

NOTE: Some commands accept as input a data type called <outletString>. <outletString> is a string representing one or more outlets. This string can be:

-one single outlet.

Examples: on 3 (turn on outlet 3);

off router (turn off the outlet called router).

-a group of outlets.

Examples: status 1,3,5 (get status of outlets 1, 3 and 5); lock 2,5-7 (lock the outlets 2, 5, 6 and 7).

humidity

The humidity command displays the Cyclades PM IPDU’s surrounding humidity and the maximum humidity the IPDU has registered (humidity peak). It may also be used to clear the saved peak humidity value. This command only works on PM IPDU models with a humidity sensor.

Syntax

humidity [<IPDU#><IPDU_ID>]reset