Cyclades PM IPDU Buzzer, Current, To turn buzzer notification on or off, enter the following

Chapter 4: Command Line Interface 35

Examples

To assign outlet 4, 6, 7, and 8 to user tess, enter the following.

pm>assign 4, 6-8 tess

4:Outlet assigned to tess.

6:Outlet assigned to tess.

7:Outlet assigned to tess.

8:Outlet assigned to tess.

buzzer

The buzzer command displays or changes the buzzer notification status. When set to on, a buzzer sounds when the current exceeds the threshold. This command is available to the admin user only.

Syntax

buzzer <onoffstatus>

Arguments

on Enables buzzer

off Disables buzzer

status Displays the buzzer status

Examples

To get the current status of the buzzer notification, enter the following.

pm>buzzer status

Buzzer is ON on IPDU #1

Buzzer is ON on IPDU #2

To turn buzzer notification on or off, enter the following.

pm>buzzer on
Buzzer turned	ON on IPDU #1
Buzzer turned	ON on IPDU #2
pm>buzzer off
Buzzer turned	OFF on IPDU #1
Buzzer turned	OFF on IPDU #2

current

The current command displays the total current drawn by Cyclades PM IPDUs and the maximum current the unit has drawn (current peak). It may also be used to clear the saved peak current value.