Appendices 73

Appendix B: Safety Instructions

Follow the safety precautions in this document when installing and operating the Cyclades PM. See the following instructions:

Safety Instructions on page 73

Sicherheitsanweisungen on page 74

Istruzioni di Sicurezza on page 75

Instruções de Segurança on page 76

Instrucciones de seguridad on page 77

Instructions de sécurités on page 78

Circuit Breakers on page 79

Safety Instructions

Read all the following safety guidelines to protect yourself and your Cyclades PM.

DANGER! All outlets of the Cyclades PM output high voltage. Necessary precautions should be taken.

DANGER! To help prevent electric shock, plug the Cyclades PM into a properly grounded power source. The power cord is equipped with a three-prong plug to help ensure proper grounding. Do not use adaptor plugs or remove the grounding prong from the cable. Do not use extension cords with the Cyclades PM.

DANGER! Do not push any objects through the openings of the Cyclades PM. Doing so may cause fire or electric shock by shorting out interior components.

DANGER! There is a possibility of severe electrical shock from either the live or neutral side of any of the power outlets or their wiring, even if one of the circuit breakers is disabled.

IMPORTANT: Cyclades PM is intended for enterprise and indoor use only.

IMPORTANT: To help protect the Cyclades PM from electrical power fluctuations, use a surge suppressor, line conditioner, or uninterruptible power supply.

IMPORTANT: Be sure that nothing rests on the cables of the Cyclades PM and that they are not located where they may be stepped on or tripped over.

IMPORTANT: Do not spill food or liquids on the Cyclades PM. If it gets wet, disconnect the power immediately and contact Cyclades.

IMPORTANT: Keep your Cyclades PM away from heat sources.

Page 85
Image 85
Cyclades PM IPDU manual Appendix B Safety Instructions