Connections
Speaker Components
(L) (R)
SWA-5000
STAND SUBWOOFER
FRONT/FRONT TOP
TX Card
CENTRE | Wireless Receiver Module | Speaker Cable (2EA) |
|
| |
SCREW (4x20): 16EA |
|
|
(L) (R) |
|
|
SCREW (5x15): 6EA
SPEAKER CABLE
SURROUND | STAND BASE |
Installing the Speakers on the Tallboy Stand
1.Turn the Stand Base
2.Insert small screws (4x20, For connecting Stand & Stand Base) clockwise into the four holes marked using a screwdriver as shown in the illustration.
!CAUTION
When you use a torque screwdriver, be careful not to put excessive force. Otherwise, it runs idle or can be damaged. (torque screwdriver- below 15 kg.f.cm)
3.Insert the large screw (5x15, For connecting Stand & Stand Base) clockwise into the hole on the rear of the stand using a screwdriver.
4.Connect the upper Speaker to the assembled Stand.
5.Insert another large screw (5x15, For connecting Speaker & Stand) clockwise into the hole on the rear of the speaker using a screwdriver.
6.This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
18 English
1 | 2 |
| Stand Base |
| Stand |
3 | 4 |
| Speaker |
| Stand |
5 | 6 |
or