Samsung HT-D6750W/ZF manual To show the RDS signals, About characters shown in the display, Codes

To show the RDS signals

You can see the RDS signals the station sends on the display.

Press the RDS DISPLAY button while		RDS DISPLAY
			1
listening to an FM station.
• Each time you press the button, the
display change to show you the
following information : PS NAME
RT CT Frequency
PS	While searching, <PS NAME>
	appears and then the station
(Program
	names will be displayed. <NO
Service)
	PS> appears if no signal is sent.
	While searching, <RT> appears
RT	and then text messages the
	station sends will be displayed.
(RadioText)
	<NO RT> appears if no signal is
	sent.
Frequency	Station frequency (non-RDS
	service)

About characters shown in the display

When the display shows PS,or RT signals,the following characters are used.

•The display window cannot differentiate upper case and lower case letters and always uses upper case letters.

•The display window cannot show accented letters, <A,> for instance, may stands for accented <A’s> like <À, Â, Ä, Á, Å and Ã.>

PTY (Program Type) indication and

PTY-SEARCH function

One of the advantages of the RDS service is that you can locate a particular kind of program from the preset channels by specifying the PTY codes.

					04
To search for a program using the PTY					Basic
codes					Functions
Before you start!
• The PTY Search is only applicable to preset
stations.
• To stop searching any time during the process,
press STOP () button while searching.
• There is a time limit in doing the following
steps.
If the setting is cancelled before you finish,
start from step 1 again.
• When pressing the buttons on the primary
remote control, make sure that you have
selected the FM station using the primary
remote control.
	RDS DISPLAY			TA
	㪈			㪊
			㪉
	PTY-	PTY SEARCH		PTY+

㪋 㪌 㪍

1.Press the PTY SEARCH button while listening to an FM station.

2.Press the PTY- or PTY+ button until the PTY code you want appears on the display.

•The display gives you the PTY codes described to the right.

3.Press the PTY SEARCH button again, while the PTY code selected in the previous step is still on the display.

•The centre unit searches 15 preset FM stations, stops when it finds the one you have selected, and tunes in that station.

English 57

HT-D6750W_ELS_1227.indd 57 2011-12-27 ￿￿ 9:26:08