Samsung HT-H7750WM/ZF, HT-H7750WM/TK Using Bluetooth Power On, Using NFC Near Field Communication

Note2

S3/S4

Note3

✎In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Home Cinema System and the Bluetooth device exceeds 10 meters. When the Bluetooth device comes back into effective range or you restart the Bluetooth device, you have to pair the device and home cinema again to reconnect.

✎In Bluetooth mode, the screen saver will start if the Bluetooth device stays in the Ready state for 5 minutes. To reconnect the Bluetooth device, turn off the screen saver, and then connect the device. To turn off the screen saver, press any button on the remote control (the Volume button, an 78:; buttons, etc.).

Using Bluetooth Power On

When the home cinema is turned off, connecting a previously connected smart device to the product via a Bluetooth connection can turn the home cinema on.

✎The home cinema must be plugged in for Quick Start to work.

✎To use this function, set Settings > System > Quick start to On.

✎To use this function, the Bluetooth connection between the Home cinema and your smart device must have been established previously, and the Home cinema must be on your smart phone's list of known Bluetooth devices.

1.Connect your previously connected smart device to the product via Bluetooth. (For information on Bluetooth connections, refer to your smart device’s manual.)

2.Once connected, the home cinema turns itself on automatically in BT mode.

•Select the desired music to play on your smart device.

Using NFC (Near Field Communication)

Connect your NFC compatible device via Bluetooth to the Home Cinema using this simple set-up procedure. You can play music from the smart phone through the Home Cinema.

1.Turn on the NFC function on the smart phone and make sure the screen lock function on the smart phone is off. The smart phone's NFC function will not work if screen lock is on.

2.Gently touch the NFC logo N on the top of the Home Cinema with the NFC supported device.

•If the Home Cinema is off, it will turn on automatically.

3.A pop-up asking whether to proceed with the Bluetooth connection appears on the smart phone. Select 'Yes'.

•When the connection is complete, the 'connected' message appears.

4.To disconnect the NFC device, touch the device to the Home Cinema's top panel again.

•To connect another NFC device while the first smart phone is still connected, touch that device to the Home Cinema's top panel. The Home Cinema will disconnect the first smart phone and connect to the second smart phone.

✎The NFC function is built into Android devices running Android OS 4.1 Jellybean or later.

-If your device is running an Android OS earlier than Android OS 4.1 Jellybean, you must download the 'Samsung NFC Connection' application from Android market to use the NFC function.

✎The position of the NFC antenna differs on smart phones. Check where the NFC antenna is located before connecting. Refer to the user manual

of your mobile phone to check the antenna’s location before making the connection.

✎If your smart phone is covered with a thick case, the connection may not succeed.

✎ The N is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.

✎ NFC tagging for Bluetooth connection cannot be established

while powering on and off. ✎ NFC tagging for Bluetooth

connection will not work while the battery indicator is blinking.

Playing Content

39 - English