Samsung HT-H7750WM/XN manual Using the Send Function, Listening to the Radio, Setting Mono/Stereo

Options

`` Slide Show

Starts the slide show. Shows all the files in the current folder, one after another. If you want to create a slide show with a selected group of photos, see Play Selected below.

`` Play Selected

Play Selected lets you select specific files to play. It works essentially the same way for all media. See "Using Play Selected with Self- Recorded Media (CDs, USB Devices, etc.)" on page 35.

`` Send

Select Send to upload selected files to on line sites (Picasa, Facebook, etc.) or to devices. To use Send with an on-line site, you need to establish an account with the on-line site, and then log in using the Log In function.

✎✎Depending on the disc or storage device, the Options menu may differ. All options may not be displayed.

Using the Send Function

1.Use the 78 buttons to select Send, and then press the OK button. The Selection screen appears.

2.Use the 78 buttons to select a picture, and then press the OK button. A check appears to the left of the picture.

3.Repeat Step 2 to select and check additional pictures.

4.To remove a picture from the list, move to the picture, and then press the OK button again. The check on the picture is removed.

5.When done, press the 78 button to select Send, and then press the OK button. The Send pop-up appears listing the on-line sites (Picasa, Facebook, etc.) or devices that you can send the photos to.

6.Select a destination, and then press the OK button.

7.If you are sending the photos to an on-line site, the site starts. Log in and follow the directions on the screen.

✎✎To send photos to an on-line site, you must have an account with that site.

Listening to the Radio

~~ To listen to the radio, you must connect the supplied FM antenna.

Operating the Radio with the Remote Control

1.Press the SOURCE button to select FM.

2.Tune to the desired station.

~~ Preset Tuning 1 : Press the PRESET button to select PRESET, and then press the 78 buttons to select a preset station.

-- Before you can tune to preset stations, you must add preset stations to the product's memory.

~~ Manual Tuning : Press the PRESET button to select MANUAL, and then press the

78 buttons to tune to a lower or higher frequency.

~~ Automatic Tuning : Press the PRESET button to select MANUAL, and then press and hold the 78 buttons to automatically search the band.

Setting Mono/Stereo

Press the ST/MO button.

~~ Each time you press the button, the sound switches between STEREO and MONO.

~~ In a poor reception area, select MONO for a clear, interference-free broadcast.

Presetting Stations

Example : Presetting FM 89.10 into memory.

1.Press the SOURCE button to select FM.

2.Press the 78 buttons to select <89.10>.

3.Press the MEMORY button.

~~ NUMBER flashes on the display.

4.Press the MEMORY button again.

~~ Press the MEMORY button before NUMBER disappears from the display on its own.

~~ After you press the MEMORY button, NUMBER disappears from the display and the station is stored in memory.

Playing Content

41 - English