Samsung HT-E5200/XE, HT-E5200/XN, HT-E5200/EN, HT-E5200/ZF manual Connecting to External Devices

Connecting to External Devices

To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the mode changes in this order : BD/DVD D. IN AUX R. IPOD HDMI1 HDMI2 FM BT

03 Connections

R

Red

AUX VIDEO

W

White

(Cable not supplied.) Method 1

External Devices

		IN	OUT
			OPTICAL
1	HDMI IN	2	DIGITAL	FM ANT
			AUDIO IN

Method 2	Method 3
(Cable not supplied.)	(Cable not supplied.)

HDMI OUT OPTICAL OUT AUDIO OUT

Method 1 HDMI IN : Connecting to an External Component with an HDMI Cable

Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital device.  Select the HDMI1 or HDMI2 mode.

Method 2 OPTICAL : Connecting an External Digital Audio Component

To connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers (Set-Top-Boxes).

Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device using a digital optical cable.

Select the D. IN mode.

Method 3 AUX IN : Connecting an External Analogue Component

Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the external analogue component.  Select the AUX mode.

•Be sure to match the colours on the cable plugs to the colours on the input and output jacks.

NOTE

To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV. This system supports Digital sampling frequencies of 32 kHz or higher from external digital components. This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.

English 19

HT-E5200_XU_0223.indd 19 2012-02-23 오후 2:29:14