Samsung BD-H6500/ZF, BD-H6500/EN manual Wireless Network, ĞĞ Wired Manual, ĞĞ Wireless Automatic

ĞĞWired - Manual

If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.

Follow Steps 1 and 2 in Wired - Automatic, and then follow these steps:

1.	Select Network Status. The product
	searches for a network, and then displays
	the connection failed message.
2.	On the bottom of the screen, select IP
	Settings, and then press the v button.
	The IP Settings screen appears.
3.	Select the IP Setting field, and then press
	the v button.
4.	Select Enter manually in the IP Setting
	field, and then press the v button.
5.	Select a value to enter (IP Address, for
	example), and then press the v button.
	Use the number keypad on your remote
	control to enter the numbers for the value.
	You can also enter numbers using the
	▲▼ buttons. Use the ◀▶ buttons on the
	remote control to move from entry field
	to entry field within a value. When done
	with one value, press the v button.
6.	Press the ▲ or ▼ button to move to

Wireless Network

You can set up a wireless network connection in four ways:

-- Wireless Automatic -- Wireless Manual -- WPS(PBC)

-- WPS(PIN)

When you configure the wireless network connection, any wireless network devices currently connected through the product or, if applicable, the product's current wired connection, will be disconnected.

ĞĞWireless - Automatic

1.In the Home screen, select Settings, and then press the v button.

2.Select Network, and then press the v button.

3.Select Network Settings, and then press the v button.

4.Select Wireless in the Network Settings screen, and then press the v button. The product searches for and then displays a list of the available networks.

04 Settings

another value, and then enter the

numbers for that value following the

instructions in Step 5.

7. Repeat Steps 5 and 6 until you have filled

in all values.

NOTE

\\ You can get the Network values from your Internet provider.

Network Settings

Select your network type.

Network type Wireless

Wireless network

iptime23

iptime

solugen_edu#2

Refresh WPS(PBC)

You can connect your Blu- ray player to the internet. Please select which wireless network to use.

8.When finished entering all the values,

select OK, and then press the v button. The product verifies the network connection and then connects to the network.

5.Select the desired network, and then press the v button.

6.On the Security screen, enter your network's Security Code or Pass Phrase. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with an arrow button, and then pressing v button.

21 English