Samsung HT-J5150/TK, HT-J5150/EN manual Appendix, Additional Information, Connections, Hdmi OUT

Appendix

Additional Information

Notes

Connections

HDMI OUT

~Certain HDMI output resolutions may not work, depending on your TV.

~A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.

Settings

TV Aspect Ratio

~Depending on the disc type, some aspect ratios may not be available.

~If you select an aspect ratio and option which is different than the aspect ratio of your TV screen, the picture might appear to be distorted.

~If you select 16:9 Original, your TV may display 4:3 Pillarbox (black bars on the sides of the picture).

BD Wise (Samsung Products only)

~When BD Wise is on, the Resolution setting automatically defaults to BD Wise and BD Wise appears in the Resolution menu.

~If the product is connected to a device that does not support BD Wise, you cannot use the BD Wise function.

~For proper operation of BD Wise, set the BD Wise option in both the product and the TV to On.

Digital Output

~Be sure to select the correct Digital Output or you will hear no sound or just loud noise.

~If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby Digital, DTS), the audio signal outputs as PCM.

~Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.

~Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects.

~This Digital Output setup does not affect the analogue (L/R) audio or HDMI audio output to your TV. It affects the optical and HDMI audio output when your product is connected to an AV receiver.

~If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your Digital Output selections (PCM or Bitstream).

~Digital Output can be activated when Speaker Selection is set to TV Speaker.

Anynet+ (HDMI-CEC)

~Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.

~This function is not available if the HDMI cable does not support CEC.

~If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.

BD Data Management

~In the external memory mode, disc playback may be stopped if you disconnect the USB device in the middle of playback.

~Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are supported.

We recommend you use USB devices that support the USB 2.0 protocol with 4 MB/sec or faster read/ write speeds.

~The Resume Play function may not work after you format the storage device.

~The total memory available to BD Data Management may differ, depending on conditions.

DivX® Video On Demand

~For more information about DivX(R) VOD, visit “http://vod.divx.com”.

Speaker Settings

~When Speaker Selection is set to TV Speaker, audio is produced by the TV speakers.

HDMI audio

~When HDMI audio is output to the TV speakers, it is automatically down-mixed to 2 channels.

Appendix

27 - English