Samsung HT-DB760 manual Before Calling for Service, Playback does not start, Sound is not produced

Page 68

Before Calling for Service

Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center.

Symptom

Check/Remedy

Disc tray does not open.

Is the power cord plugged securely into the outlet?

 

Turn off the power and then turn it back on.

 

 

 

 

 

 

 

 

 

Playback does not start.

Check the region number of the DVD.

DVD discs purchased from abroad may not be playable.

 

CD-ROMs and DVD-ROMs cannot be played on this DVD

 

player.

 

Make sure that the rating level is correct.

 

 

 

 

 

 

 

 

 

Playback does not start

Are you using a deformed disc or a disc with scratches on

immediately when the

the surface?

Play/Pause button is pressed.

Wipe the disc clean.

 

 

 

 

 

 

 

 

 

Sound is not produced.

No sound is heard during fast playback, slow playback, and step

motion playback.

 

Are the speakers connected properly? Is the speaker setup

 

correctly customized?

 

Is the disc severely damaged?

 

 

 

 

 

 

 

 

 

Sound can be heard only

When listening to a CD or radio, sound is output to the front

speakers (L/R) only. Select "PRO LOGIC II" by pressing

 

 

 

 

 

 

 

 

 

 

from a few speakers and

(Dolby Pro Logic II) on the remote control to use all six speakers.

not all six.

Make sure that the DVD disc is 5.1-CH compatible.

If you set C, SL, and SR to NONE in the speaker mode in the

 

audio setup of the setup screen, no sound is heard from the

 

center speaker and the front left and right speakers. Set C, SL,

 

and SR to SMALL.

 

 

 

 

 

 

 

 

 

Picture does not appear, sound

Was the DVD player suddenly moved from a cold place to a warm

is not produced, or the disc

one? When condensation forms inside the player, remove the disc

and let the player stand for 1 or 2 hours with the power on. (You

tray opens 2 to 5 seconds later.

can use the player again after condensation disappears.)

 

 

 

 

 

 

 

 

 

Dolby Digital 5.1 CH

Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1

Surround Sound is not

CH Surround Sound is produced only if the disc is recorded with

5.1 channel sound.

produced.

Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in

 

the information display?

 

 

 

 

 

 

 

 

 

67

Image 68
Contents Digital Home Cinema System Safety Warnings Class 1 Laser ProductPrecautions PreparationFeatures Contents Playable Discs Copy ProtectionDisc Recording Format Description PRO Logic II indicatorSpeaker indicator Indicator Video Output Connector Channel SpeakerSLOW, MO/ST button Rrss button TV indicatorDVD Receiver indicator Mode button DVD button AUX button Range of Operation of the Remote Control Insert Remote BatteriesConnecting the Speakers Position of the DVD Player Selecting the Listening PositionBack of the Speaker Mounting the Speakers to a Wall Screws B as shown in the illustrationConnecting the Video to TV Connecting the Antennas FM antenna connectionAMMW/LW antenna connection Antennanot suppliedConnecting External Components Connecting an External Digital ComponentConnecting an External Analog Component Press AUX on the remote control to select AUX 1 or AUXPress the Mode Button so that Selecting the Video FormatDisc Playback Disc trayLoad a discs To stop playback Press Stop during playbackDisplaying Disc Information Press Info buttonChecking the Remaining Time Press the Remain buttonPress Slow button Fast/Slow PlaybackPress and hold Skipping Scenes/Songs Briefly pressRepeat Playback Press Repeat buttonPress Info button twice Press EnterAngle Function Press CursorZoom Function Press ZoomButton Press EZ View buttonTwice 1Press Info button twicePress Info button Press Cursor 1Press Info button Press Cursor , buttonsTime display Chapter displayPBC Playback Control Function Using Disc MenuPress Cursor Buttons to Press Enter Using the Title Menu Press Menu button to exit the setup screenPress Menu Button to move toSetting the Language Press Enter buttonPress Enter Press Cursor Press Enter buttonSetting TV Screen type DISPLAY’ and thenAdjusting the TV Aspect Ratio Screen Size 43LB43PS LetterboxSetting Parental Controls Rating Level Enter the password Press Cursor , buttonSetting the Password Press Cursor Button to move to Press Menu buttonButton Enter button During playback, press Setting the Wallpaper Jpeg DVD VCD1PLAY/PAUSE button when the image you like comes up ‘Setup’ and then To Change the WallpaperPress Enter button Press Cursor Setting the Speaker ModeSpeaker Press Test Tone button Setting the Test Tone‘Audio’ and then Setting the Delay Time Press Cursor buttonSetting Center Speaker Setting Rear Surround SpeakersSetting the Audio Quality Enter button Press Cursor buttonMethod 2 When manually adjusting with the Sound Edit button Press SoundSetting the DRC Dynamic Range Compression ‘DRC’ and then press Enter button Dolby Pro Logic II Mode Press PL II Mode buttonPress PL II Mode Button to select ‘MUSIC’ modeDolby Pro Logic II Effect Press PL II Effect buttonWhen Remove MIC Setting the RRSSRear Reflecting Surround SystemTo cancel the Rrss setup Briefly press the Rrss buttonPress and hold the Rrss button Next,briefly press the Rrss buttonWhat is RRSS? Rear Reflecting Surround SystemLive Surround Mode Each time you press the LSM +To cancel the surround plus Surround Plus / Virtual HeadphonePress the Super Button to select To cancel thisSuper Remote Control Unit Press Tuner Listening to RadioBand button Main UnitPresetting Stations About RDS broadcasting Using the RDS Radio Data System to receive FM stationsWhat information can RDS signals provide? PTY Program Type indication and PTY-SEARCH function Before you start, rememberTo confirm the sleep timer setting, press Sleep button Convenient FunctionsPress Sleep button OFF appears on the displayPress Dimmer button Press Mute buttonOperating the TV with the Remote Control TV Brand Code List Brand CodeBefore Calling for Service Playback does not startSound is not produced Surround Sound is notLevel has been forgotten Password for ratingAspect ratio cannot be Handling and Storing Discs Handling discsDisc Storage Specifications 1ch speaker systemNumber Memo AH68-01365B
Related manuals
Manual 74 pages 15.35 Kb