Dolby Pro Logic II decoder
Dolby Pro Logic II
Dolby Pro Logic II is a new format for playing multichannel audio signals that offers improvements over conventional Dolby Pro Logic. It can be used to decode not only sources recorded in Dolby Surround, but also regular stereo sources into five channels (front left/right, center and surround left/right). In addition,
Effect
Dolby Pro Logic II Effect Function
This function works only in the DPL II M (Dolby Pro Logic II Music) Mode.
various parameters can be set according to the type of source and the contents, so you can adjust the sound field with greater precision.
1
Press the Function button on the front panel to select the desired function.
• Select from FM ➞ AM ➞ DVD ➞ DIGITAL IN ➞ AUX 1 ➞ AUX 2.
1
Press the DSP/DPL II Effect button.
•Each time the DSP/DPL II Effect button is pressed.
2
Use the Left/Right ( ▲ / ▲) button to make adjustments.
2
Press the Pro Logic II button.
•Each time the Pro Logic II button is pressed.
3
Press the DSP/DPL II Mode button.
•Each time the DSP/DPL II Mode button is pressed.
Select “0” or “1”
The control can be set in 8 steps from 0 to 7.
L | R | PRO LOGIC |
| L | R | PRO LOGIC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PRO LOGIC II : Left, Center, Right,
| Subwoofer and |
|
|
|
| ||
|
|
|
|
| |||
| Surround(Left, Right) | L | R | PRO LOGIC |
| ||
| Channels |
|
|
|
| ||
|
|
|
|
| |||
|
|
|
|
| |||
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| L R |
|
| L | R | PRO LOGIC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
STEREO : Left, Right and Subwoofer Channels |
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
| L | R | PRO LOGIC |
|
|
|
|
|
| |||
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro Logic II Mode
Select one of the modes (“MUSIC”, “CINEMA”, “PRO LOGIC” or “MATRIX”).
•The Music mode is recommended when listening to CDs or watching DVDs with mostly musical content.
•The Cinema mode is best when watching movies.
•The Pro Logic mode offers the same surround processing as original Pro Logic and is best used when the source contents are not of optimum quality.
•The Matrix mode is useful for when the audio is mono.
The control can be set in 7 steps from 0 to 6.
•Panorama Mode
This mode extends the front stereo image to include the surround speakers for an exciting “wraparound” effect with side wall imaging.
•Center Width Control
This control adjusts the center image so it may be heard only from the center speaker; only from the left/right speakers as a phantom image; or from all three front speakers to varying degrees.
•Dimension Control
This control gradually adjusts the soundfield either towards the front or towards the rear.
• When playing a DVD encoded in two or more channels, DOLBY PRO LOGIC II mode cannot be selected.
SETUP
35 | 36 |