Controlling a
TV with the Remote
You can use the remote control to operate other manufactures’ TV.
Before Using the DVD Player
Your DVD player is capable of playing DVD, VCD, and CD discs.
User instructions may vary depending on the type of disc. Read the instructions carefully before use.
1 | Turn on the TV. |
|
2 | Point the DVD’s remote at the TV. | |
3 | TV |
|
While holding the | button down, enter the | |
code for your brand. |
| |
•If there is more than one code listed in the table, enter one at a time to determine which code works.
| example : For SAMSUNG 1TVs | TV | |||||||
|
| While holding down the | button, | ||||||
|
| enter |
|
|
|
| . |
|
|
|
|
|
|
|
|
|
|
|
|
4 | If the TV turns off, setup is complete. | ||||||||
• Now, you can perform the following operations on the TV. | |||||||||
|
|
|
|
|
| ||||
|
| TV | : Turn on or off the TV. |
|
| ||||
|
|
|
|
|
| ||||
|
| VOLUME +/– | : Adjust the volume. |
|
| ||||
|
|
|
|
| |||||
|
| TV/VIDEO | : Set the input mode (either TV or VIDEO) |
| |||||
|
| CHANNEL +/– | : Change the channels. |
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Manufacturer | CODES |
Samsung | 01~06,32 |
Akai | 12 |
FIisher | 12 |
Grundig | 09,17,21 |
Hitachi | 11,13,14,24 |
JVC | 32 |
LG | 02,30 |
Mitsubishi | 02,16 |
Mival | 29 |
Nokia | 23 |
Nordmende | 13,14,24 |
Panasonic | 08,23~27 |
Philips | 02,20,22 |
Saba | 13,14,22~24 |
Sanyo | 12,16 |
Schneider | 02 |
Sharp | 10,31 |
Sony | 15,16 |
Telefunken | 14,24,28 |
Thomson | 13,14,24,33,34 |
Toshiba | 07,16~19,21 |
| 1 | 2 | 3 |
| |
| Turn on the power | Select a video mode by | Press the DVD button |
| |
Prepe- | to your DVD player | pressing the TV/VIDEO | to select the DVD input | CONNECTIONS | |
rations | and TV. | button. | function. | ||
| |||||
before | TV | TV/VIDEO | DVD |
| |
use |
|
| |||
|
|
|
|
• The “WAIT” message that appears on the display for about 4~5 seconds when turning on the power or selecting a DVD function indicates a stabilization period for optimizing the condition of your DVD player. While the message is being displayed, other buttons remain inactive.
•When the power is not turned on, press down the Stop ( 
) button on the main unit for over 5 seconds.
The product will be initialized to its optimum state.
•As to some operational features such as the Speaker mode, Test tone, Volume, etc. your DVD player will not display their operation on the TV screen.
• Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
Connecting your System to the Power Supply
The AC Cord must be plugged into an appropriate socket.
Before plugging your system into an AC outlet, you must check the voltage.
1.Plug the AC Cord on the rear of the system into an appropriate outlet.
2.Press the On/Standby button to switch your DVD Player system on.
AV OUT
RGB |
COMPOSITE |
13
TV Broadcast System
•This device is designed to work with the PAL video format.
•For normal playback, the video format a DVD disc is recorded in must coincide with your TV's video format.
14