Listening to the Radio
You can listen to the chosen band (FM, MW or LW broadcast stations) by using either the automatic tuning or manual tuning operation.
Presetting stations
You can store up to:
15 | FM stations | • FM | Frequency Modulation |
8 MW stations | • AM(MW) | Medium Wave | |
7 | LW stations | • LW | Long Wave |
|
| ||
Example: Presetting FM 89.1 in the memory
Remote
Control
Unit
1
Press the Tuner(Band) button.
• The selection toggles back |
and forth between "FM" "MW" |
2
Select a broadcast station.
| When the |
| button is pressed, a preset | |
Auto Station 1 | ||||
broadcast station is selected. | ||||
| ||||
1
Press the Tuner(Band) button and select the FM band.
2
Select the MANUAL by pressing the Stop ( 
) button on the main unit.
3
Use the ▲▲ and ▲▲ button to tune into 89.1
and "LW" each time the |
Tuner(Band) button is |
pressed. |
Auto Station 2 | Hold in the | button. Automatic searching | |
begins, and then stops when a station is tuned in. | |||
| |||
| Press the | button to tune to the chosen | |
Manual Station | |||
station. The frequency changes incrementally in either | |||
| |||
direction each time the corresponding button is pressed.
•The selection toggles back and forth between " 
" each time the Tuner(Band) button is pressed.
L | R | L | R | L | R |
| MHZ |
|
|
| MHZ |
Main
1
Press the Function button to
2
4
Press the Program button on
5
If you want to save 89.1 to another
6
Unit select the desired band (FM, MW or LW).
Select a broadcast station.
Auto Station 1 | Press the Stop ( |
| ) button to select the PRESET | ||
mode. Then press the |
| button to select a | |||
|
| ||||
|
|
|
|
|
|
the remote control, FM1 will flash. If you want to save 89.1 to FM1, press Program again.
preset location(FM2~FM15), press
▲▲ or ▲▲
, then press Program to save it to that location.
To preset other stations, follow steps 1~5 again.
station stored in the preset | |
Auto Station 2 Press the Stop ( | ) button to select the MANUAL |
PRGM | PRGM |
L | R | L | R |
MHZ | MHZ |
To Listen in Mono/Stereo
Manual Station
Audio
MO/ST
mode on the front panel. Then hold in the 
button to make the unit begin automaticall searching for broadcast stations.
Press the Stop ( 
) button to select the MANUAL
mode front panel. Press the 
button to tune to the desired station. The frequency changes incrementally in either direction each time the corresponding button is pressed.
L | R |
MHZ
To tune in a preset station
See the previous page.
RADIO OPERATION
Press the MO/ST button. (only FM)
•The selection toggles back and forth between “STEREO” and “MONO” each time the MO/ST button is pressed.
•In a poor reception areas, select Mono mode for a clear,
39 | 40 |