Basic Functions
S/W LEVEL
You can also press the S/W LEVEL button on the remote control and use the ◄ or ► 
buttons to adjust the level of subwoofer. 
Press the S/W LEVEL button.
Dolby Pro Logic II Mode
You can select the desired Dolby Pro Logic II audio mode, P.Bass or MP3 Enhancement function.
Press the | PL II button. | P L | |
㪈 | |||
|
|
MP3 ENHANCE ON ➞ POWER BASS ON ➞ POWER BASS OFF ➞ MUSIC ➞ MOVIE ➞ PROLOG ➞ MATRIX ➞ STEREO
✎NOTE
When selecting Pro Logic II mode, connect your external device to the AUDIO INPUT jacks (L and R) on the product. If you connect to only one of the inputs (L or R), you cannot listen to surround sound.
The Pro Logic II function is only available in Stereo mode.
The Pro Logic II function is not available while playing AC3 signal in 2.1 channel mode.
Listening to Radio
Using buttons on the Remote Control
1.Press the FUNCTION button to select FM.
2.Tune in to the desired station.
•Preset Tuning 1 : You must first add a desired frequency as a preset. Press the STOP () button to select PRESET and then press the
TUNING (
) button to select the preset station.
•Manual Tuning : Press the STOP () button to select MANUAL and then press the TUNING
(
) button to tune in to a lower or higher frequency.
28 English
•Automatic Tuning : Press the STOP () button to select MANUAL and then press and hold the
TUNING (
) button to automatically search the band.
Setting Mono/Stereo
Press the MO/ST button.
• Each time the button is pressed, the sound switches between STEREO and MONO.
•In a poor reception area, select MONO for a clear,
Presetting Stations
Example : Presetting FM 89.10 in the memory
1.Press the FUNCTION button to select FM.
2.Press the TUNING (,,.) buttons to select <89.10>.
3. Press the TUNER MEMORY button.
• Number flashes on the display.
4. Press the TUNING (,,.) buttons to select preset number.
•You can select between 1 and 15 presets.
5.Press the TUNER MEMORY button again.
•Press the TUNER MEMORY button before number disappears from the display.
•Number disappears from the display and the station is stored in memory.
6.To preset another station, repeat steps 2 to 5.