IS1184, Gasket Installation | Lightolier instruction

READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE

This fixture is intended for installation in accordance with the National Electrical Code and local regulations. To

assure full compliance with local codes and regulations, check with your local electrical inspector before

installation. To prevent electric shock, turn off electricity at fuse box before proceeding.

Retain these instructions for maintenance reference.

INSTRUCTION SHEET NO.

IS:1184

B1104

Page 1 of 1

INSTALLATION PROCEDURE FOR: 1184WH, 1184CD, 1084WH, 1084CD, 2084WH, 2084CD

1184WH and 1184CD for use with 1104ICX, 1103R, 1100IC, 1100AICM and 1102P1 only. 1084WH and 1084CD for use with 1004ICX, 1003R, 1000IC, 1000AICM and 1002P1 only.

2084WH and 2084CD for use with 2000IC, 2000AIC, 2003R and 2002P1 only.

CAUTION: (RISK OF FIRE) FOR NON-IC RATED INSTALLATIONS, DO NOT INSTALL INSULATION ABOVE

OR WITHIN 3 INCHES OF ANY PART OF FIXTURE.

CAUTION: USE ONLY REFLECTOR TRIMS PROVIDED BY LIGHTOLIER. USE OF OTHER MANUFACTURER’S REFLECTOR

TRIMS MAY VOID THE UNDERWRITERS LABORATORIES LISTING AND COULD CONSTITUTE A FIRE HAZARD.

CAUTION: BEFORE INSTALLING REFLECTOR TO FRAME-IN-KIT, READ MARKINGS IN REFLECTOR AND IN SOCKET CUP

OF FRAME-IN-KIT TO DETERMINE LAMP WATTAGE AND TYPE APPLICABLE FOR YOUR INSTALLATION.

1FRAME-IN KIT INSTALLATION: See Frame-In Kit Instruction Sheet for installation procedure.

2GASKET INSTALLATION:

A.Align open side of gasket towards socket cup (figure A).

B.Pinch gasket and insert both edges under the reflector spring clip. (figure B).

C.Push center of gasket back into socket cup until inner diameter fits over the lamp socket and smaller thru hole in gasket sits on top of socket (figure C).

Figure AFigure BFigure C

CAUTION – DO NOT STRETCH SMALL HOLE OF GASKET OVER LAMP SOCKET.

THE GASKET MUST SIT ON TOP OF SOCKET TO PROVIDE SEAL TO LAMP.

3ROTATE ROTO-CLIPS:

Rotate (4) ROTO-CLIPS so that the short legs extend inwardly toward center opening (figure D).

Note: The short leg of the ROTO-CLIP has no return on top.

Figure D

4 SNAP ON:

Insert gasketed socket cup into neck of reflector trim making sure spring clips of socket cup snap into slots of reflector (figure E). If reflector trim has 2 sets of slots, the upper slot is used for IC frame-in kits, the lower slot for non-IC frame-in kits. Note: At no time should the lamp extend outside the reflector trim.

Figure E

5PUSH UP:

Align Reflector Trim so that ROTO-CLIPS will not interfere with socket cup spring clips and push reflector trim straight up into fixture housing until it is tight against ceiling (figure F).

Note: To remove reflector trim, turn reflector trim counterclockwise while pulling downward. Once trim is out of the ceiling, squeeze reflector spring clips until the trim disengages from socket cup. (figure G).

Replacement Gasket Available: Lightolier Catalog No. LFG356

Figure F

Figure G

A COMPANY

631 Airport Road, Fall River, MA 02720

1084CD, 1084WH, 2084CD, 2084WH, 1184CD specifications

Lightolier, a prominent name in the lighting industry, has established its reputation through innovative designs and advanced technologies. The Lightolier 1184, 2084WH, 2084CD, 1084WH, and 1184CD models exemplify the brand's commitment to quality and functionality, catering to various lighting needs in residential and commercial settings.

The Lightolier 1184 is designed with versatility in mind. This model features a sleek and modern aesthetic, making it suitable for a range of applications from homes to office environments. One of its key features is its adjustable spotlight, allowing users to focus light precisely where it is needed. The 1184 also incorporates energy-efficient LED technology, which not only reduces energy consumption but also extends the lifespan of the lighting fixture.

Similarly, the Lightolier 2084WH and 2084CD models stand out for their impressive design and functionality. The 2084WH model is characterized by its white finish, making it an ideal choice for contemporary spaces. It also offers dimming capabilities, allowing users to create the perfect ambiance. The 2084CD variant, on the other hand, features a decorative chrome finish that adds a luxurious touch to any room. Both models utilize advanced thermal management technology, ensuring optimal performance while maintaining low heat output.

The Lightolier 1084WH model brings elegance to lighting solutions. With its clean lines and minimalist design, it fits seamlessly into modern interiors. Featuring a more diffuse light output, the 1084WH is perfect for general lighting needs, providing a warm and inviting atmosphere. This fixture is also compatible with smart home systems, ensuring convenience and control for users.

Lastly, the 1184CD model complements the range with its chic design and functionality. Featuring a designer finish, it not only illuminates spaces effectively but also serves as a stylistic statement. This model is energy-efficient and equipped with advanced optics, which enhance light distribution while ensuring a high color rendering index (CRI), important for accurately showcasing colors in any environment.

In conclusion, the Lightolier 1184, 2084WH, 2084CD, 1084WH, and 1184CD models embody the essence of modern lighting design, combining aesthetic appeal with cutting-edge technology. Their versatility, energy efficiency, and elegant designs make them perfect for transforming any space into a well-lit and beautifully designed environment. Whether you are upgrading your home or designing an office, these fixtures offer innovative solutions to meet diverse lighting needs.