HP 3100 manual Fax Setup Wizard Windows or Fax Setup Utility Mac runs

During a normal installation of the HP All-in-One software, the following events occur:

1.The HP All-in-One software CD-ROM runs automatically.

2.The software installs.

3.Files are copied to your computer.

4.You are requested to connect the HP All-in-One to your computer.

5.A green OK and check mark appear on an installation wizard screen.

6.You are requested to restart your computer.

7.The Fax Setup Wizard (Windows) or Fax Setup Utility (Mac) runs.

8.The registration process runs.

If any of these things did not occur, there might be a problem with the installation. To check the installation on a Windows computer, verify the following:

●Start the HP Solution Center and check to make sure the following buttons appear: Scan Picture, Scan Document, Send a Fax. If the icons do not appear immediately, you might need to wait a few minutes for the HP All-in-One to connect to your computer. Otherwise, see Some of the buttons are missing in the HP Solution Center (Windows).

For information on starting the HP Solution Center, see the onscreen HP Image Zone Help that came with your software.

●Open the Printers dialog box and check to see that the HP All-in-One is listed.

●Look in the system tray at the far right of the Windows taskbar for an HP All-in- One icon. This indicates that the HP All-in-One is ready.

When I insert the CD-ROM into my computer’s CD-ROM drive, nothing happens

Solution If the installation does not run automatically, you can start it manually.

To start the installation from a Windows computer

1.From the Windows Start menu, click Run.

2.In the Run dialog box, enter d:\setup.exe (if your CD-ROM drive is not assigned to drive letter D, enter the appropriate drive letter), and then click OK.

To start the installation from a Mac

1.Double-click the CD icon on your desktop to view the contents of the CD.

2.Double-click the Setup icon.

The minimum system checks screen appears (Windows)

Solution Your system does not meet the minimum requirements to install the software. Click Details to see what the specific problem is, and then correct the problem before attempting to install the software.

You can also try installing HP Image Zone Express instead. HP Image Zone Express provides less functionality than the HP Image Zone software, but it requires less space and memory on your computer.

For more information about installing the HP Image Zone Express software, see the Setup Guide that came with your HP All-in-One.

Troubleshooting

User Guide 115