HP 3100 Choose papers for printing and copying, Load an oversized original, To remove the lid

Load originals and load paper

Chapter 4

Load an oversized original

To remove the lid

1.Lift the lid to the open position, grasp the sides of the lid, and then gently pull the lid upward until it stops.

2.Press the hinge releases until the lid separates from the rest of the HP All-in-One.

3.When you finish copying, scanning, or faxing, replace the list by inserting the tabs on the hinge back into the appropriate slots.

You can copy, scan, or fax oversized originals by completely removing the lid from your HP All-in-One. Your HP All-in-One functions normally with the lid removed.

Tip When you copy oversized originals, place the lid over the original. This improves the quality of the copy and reduces ink use.

Choose papers for printing and copying

You can use many types and sizes of paper in your HP All-in-One. Review the following recommendations to get the best printing and copying quality. Whenever you change paper types or sizes, remember to change those settings.

56 HP Photosmart 3100 All-in-One series