HP 3100 manual Connection information, Supported connection types, Connect using a USB cable

Models: 3100

1 166
Download 166 pages 26.48 Kb
Page 28
Image 28

Connection information

Your HP All-in-One comes equipped with a USB port so you can connect directly to a computer using a USB cable. If you insert an HP bt300 or HP bt400 series Bluetooth® Wireless Printer Adapter into the front USB port, Bluetooth® devices such as PDAs and camera phones can print to your HP All-in-One.

Note In the remainder of this chapter, the HP bt300 or HP bt400 series Bluetooth® Wireless Printer Adapter is referred to simply as an HP Bluetooth® adapter.

Supported connection types

Description

Recommended number of connected computers for best performance

Supported software Setup instructions features

USB connection

HP bt300 or HP bt400 series Bluetooth® Wireless Printer Adapter (HP Bluetooth® adapter)

Printer sharing

One computer connected with a USB cable to the USB port on the back of the HP All-in-One.

One Bluetooth® device or computer.

Up to five computers.

The host computer must be turned on at all times, or the other computers will not be able to print to the HP All-in-One.

All features are supported.

Printing from a Bluetooth® device such as a PDA or camera phone, or a Bluetooth®-enabled computer.

All features resident on the host computer are supported. Only print is supported from the other computers.

Follow the Setup Guide for detailed instructions.

For information on printing from a device such as a PDA or camera, see the onscreen HP Image Zone Help.

For information on printing from a Bluetooth®-enabled computer, see Connect using Bluetooth®.

For setup instructions, see Use printer sharing (Windows) or Use printer sharing (Mac).

Finish setup

Connect using a USB cable

To connect your HP All-in-One using a USB cable, follow the instructions in the printed Setup Guide.

User Guide

25

Page 28
Image 28
HP 3100 manual Connection information, Supported connection types, Connect using a USB cable