Samsung SPA400BX/EDC, SPA400BCX/EDC manual Installation and Connection, Menu and Remote Control

Page 33

Before Contacting Service Personnel

Installation and Connection

Symptoms

No Power.

I want to install my projector on the ceiling.

External Source can not be selected.

Troubleshooting

zCheck the power cable connections.

zThe ceiling installation support is sold separately. Contact your local product distributor.

zBe sure that the connection cable(s) (video) is properly connected to the proper port. If the device is not connected properly, it can not be selected.

Menu and Remote Control

Symptoms

Troubleshooting

Remote control does not work.

zBe sure that the proper external source is selected.

zCheck the battery of your remote control. If its size is incorrect, replace it with the recommended battery size. Check whether the polarity of the installed battery is correct.

zCheck whether your remote control is at a right angle and at the correct distance. Remove any obstacles between your remote control and the product.

zDirect lighting of 3-way light bulbs or other lighting device on the remote sensor of the projector may affect the sensitivity and cause the remote control to malfunction.

zCheck if the remote control battery is empty.

zCheck whether the LED indicator on the top of the projector is turned on.

I cannot select a menu.

z Check if the menu is displayed in gray. A gray-colored menu is unavailable.

Screen and External Source

 

 

Symptoms

 

Troubleshooting

Cannot see picture images.

z Be sure that the power cord of the projector is connected.

 

z Be sure that the proper input source is selected.

 

z Check that the connectors are properly connected to the ports at the back of

 

 

the projector.

 

z Check the Remote Control batteries.

 

z Be sure that the <Color>, <Brightness> settings are not at their lower limit.

Poor color.

z

Adjust the <Tint> and <Contrast>.

Images are not clear.

z

Adjust the focus.

 

z Check that the projection distance is either too far or too near to the screen.

Strange noise.

z If a strange sound continues, contact our service center.

The operating LED is lit up.

z Refer to Corrective Actions According to LED Indications.

Lines appear on screen.

z Because noise may occur when using your PC, adjust the frequency of the

 

 

screen.

No external device screen is displayed.

z Check the operating status for the external device and check whether the

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Page Do not use loose power outlets or damaged power cables Insert the power plug firmly so that it does not come looseUnder no circumstances touch the power plug with wet hands Do not plug multiple devices into a single wall outletKeep the power cord away from heaters Unplug the power plug before cleaning the productPlace the product on the ground carefully Do not drop the product while carrying itKeep the product out of children’s reach If swallowed, see a doctor immediately Do not disassemble, or attempt to fix or modify the productTake care not to lose the lens cover of the product Make sure to place your remote control on a table or deskPage Front/Upper Side Optical engine with advanced DLP technologyUnpacking Adjustable FeetLED Indications Clearing Indicator ProblemsRear Side CenterMove /ENTER OFFModel Supported Display Modes Hdmi Supported Resolution/Size ModesPicture Position Modes 480i 169 Mode Select Menu Setup Install Rear-Floor Installing the ProjectorSelect Menu Setup Install Front-Floor Zoom and Focus AdjustmentScreen Size and Projection Distance Leveling with Adjustable FeetScreen Rear of Projector Connecting a DVD player/Cable/Satellite Box to HDMI/DVI Using the ProjectorConnecting a DVD player/Cable/Satellite Box via Component Connecting to PC Connecting to VCR/CamcorderConnecting Video Devices Monitor, TV, etc Page Component Video You can only adjust Tint in S-Video and Video modes You can only adjust Sharpness in S-Video and Video modesStandard Movie1, Movie2Position Adjust the screen position if it is not aligned Color Temperature Offset GainFull 169Light Setting InstallOnly activated in the PC environment Maximum and then perform Fine Adjustment again60 sec Time Sec 90 sec 10 sec 120 sec 30 secOff Installation and Connection Menu and Remote ControlScreen and External Source Page Clean the projector using a soft dry cloth To clean the exterior and lens of the projectorTo clean the interior of the projector Lamp ReplacementLamp Replacement Procedure Latin America Switzerland Color Temperature Backlight Remote ControlGamma Mode Analog BroadcastOverscan RS-232C Port Service Input PortVideo in Port Satellite Broadcast
Related manuals
Manual 40 pages 52.21 Kb Manual 40 pages 48.75 Kb Manual 37 pages 18.65 Kb Manual 38 pages 20.38 Kb Manual 40 pages 32.12 Kb Manual 39 pages 19.59 Kb Manual 41 pages 3.78 Kb Manual 39 pages 31.46 Kb Manual 40 pages 45.06 Kb Manual 39 pages 17.03 Kb Manual 41 pages 55.43 Kb Manual 37 pages 25.87 Kb Manual 38 pages 55.13 Kb Manual 38 pages 58.44 Kb Manual 40 pages 59.39 Kb Manual 40 pages 57.72 Kb

SPA400BCX/EDC, SPA400BX/EDC specifications

Samsung SPA400BX/EDC and SPA400BCX/EDC models are advanced networked communication solutions designed for businesses seeking reliable and efficient communication tools. These products belong to the suite of Samsung's SPA series, which is known for its innovative features and robust performance.

One of the main features of the SPA400BX/EDC and SPA400BCX/EDC is their support for Voice over Internet Protocol (VoIP) technology. VoIP allows for high-quality voice communication over the internet, reducing long-distance call costs and enabling seamless connectivity. This feature is essential for businesses aiming to optimize their communication infrastructure while ensuring sound clarity and efficiency.

Another significant characteristic is the dual-mode support offered by these devices. They are compatible with both analog and digital phones, which provides flexibility for businesses that may have existing telephony infrastructure. This adaptability allows companies to gradually migrate to digital systems without incurring hefty expenses on new hardware.

The SPA400 series incorporates advanced call management features, such as call forwarding, voicemail, and auto-attendants. These features enhance the capability to handle high call volumes effectively, improving customer interaction and service quality. The user-friendly interface streamlines the configuration process, enabling easy setup and maintenance.

Furthermore, the SPA400BX/EDC and SPA400BCX/EDC boast built-in security features to protect sensitive data and communications. Encryption protocols and secure signaling help mitigate risks associated with VoIP, which is crucial in today's data-driven environment where cyber threats are prevalent.

Additionally, these models are designed to be energy-efficient, aligning with corporate sustainability goals. This characteristic not only helps reduce operational costs but also meets the growing demand for environmentally responsible technology solutions.

Overall, the Samsung SPA400BX/EDC and SPA400BCX/EDC represent a significant evolution in business communication technology. Their combination of VoIP support, dual-mode compatibility, advanced call management features, robust security, and energy efficiency makes them ideal for organizations looking to enhance their communication strategies. With comprehensive functionality and reliability, these models are poised to meet the dynamic needs of modern businesses.
Top Page Image Contents