Samsung SPA400BCX/EDC, SPA400BX/EDC manual LED Indications, Clearing Indicator Problems

Page 10

Power Cable

Remote Control/ 2 Batteries

Cleaning Cloth

LED Indications

 

 

●:Light is On ◐:Light is Blinking

○:Light is Off

STAND

LAMP

TEMP

Information

BY

 

 

 

●

○

○

If you press the POWER button on the remote control or projector, the screen

appears within 30 seconds.

 

 

 

●

●

○

The projector is in normal operating condition.

●

◐

○

This state appears when the projector is preparing an operation after the POWER button

on the projector or the remote control has been pressed.

 

 

 

 

 

 

The POWER button is pressed to turn off the projector, and the cooling system is in

○

◐

○

operation to cool off the inside of the projector. (Lasts for about 1 minute and 30

 

 

 

seconds)

◐

○

◐

Refer to Action 1 below if the cooling fan inside the projector is not in normal operation

condition.

 

 

 

○

◐

◐

Refer to Action 2 below if the lamp cover protecting the lamp unit is not closed

properly.

 

 

 

○

○

◐

Power is turned off automatically when temperature inside of the projector goes beyond

the control limit. Refer to Action 3.

 

 

 

●

◐

◐

A problem has occurred when operating the DDP IC in the product. Refer to Action 4.

◐

◐

◐

A problem has occurred with the operation of the lamp. Refer to Action 5.

●

◐

●

The lifetime of the lamp has expired. Refer to Action 6.

◐

◐

○

The memory in the product is not operating normally. Contact a service center.

◐

◐

●

The power for the product is not operating normally. Contact a service center.

◐

●

◐

A problem has occurred when operating the color wheel in the product. Refer to Action

4.

 

 

 

Clearing Indicator Problems

ClassificationState

When the cooling fan

Action 1 system is not in normal operating condition.

Measures

If the symptom remains even after disconnecting and then reconnecting the power cord and turning the projector on again, contact your product provider or our service center.

Action 2

When the lamp cover protecting the lamp unit is not properly closed or the sensor system is not in normal operating condition.

Check whether the screws at the bottom side of the projector are fastened correctly. If they are abnormally fastened, contact your product distributor or service center.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Page Under no circumstances touch the power plug with wet hands Insert the power plug firmly so that it does not come looseDo not use loose power outlets or damaged power cables Do not plug multiple devices into a single wall outletUnplug the power plug before cleaning the product Keep the power cord away from heatersDo not drop the product while carrying it Place the product on the ground carefullyKeep the product out of children’s reach Do not disassemble, or attempt to fix or modify the product If swallowed, see a doctor immediatelyMake sure to place your remote control on a table or desk Take care not to lose the lens cover of the productPage Optical engine with advanced DLP technology Front/Upper SideAdjustable Feet UnpackingClearing Indicator Problems LED IndicationsCenter Rear SideOFF Move /ENTERModel Supported Display Modes Supported Resolution/Size Modes HdmiPicture Position Modes 480i 169 Mode Select Menu Setup Install Front-Floor Installing the ProjectorSelect Menu Setup Install Rear-Floor Zoom and Focus AdjustmentLeveling with Adjustable Feet Screen Size and Projection DistanceScreen Rear of Projector Using the Projector Connecting a DVD player/Cable/Satellite Box to HDMI/DVIConnecting a DVD player/Cable/Satellite Box via Component Connecting to VCR/Camcorder Connecting to PCConnecting Video Devices Monitor, TV, etc Page Component Video Standard You can only adjust Sharpness in S-Video and Video modesYou can only adjust Tint in S-Video and Video modes Movie1, Movie2Full Color Temperature Offset GainPosition Adjust the screen position if it is not aligned 169Install Light SettingMaximum and then perform Fine Adjustment again Only activated in the PC environmentTime Sec 90 sec 10 sec 120 sec 30 sec 60 secOff Menu and Remote Control Installation and ConnectionScreen and External Source Page To clean the interior of the projector To clean the exterior and lens of the projectorClean the projector using a soft dry cloth Lamp ReplacementLamp Replacement Procedure Latin America Switzerland Gamma Mode Backlight Remote ControlColor Temperature Analog BroadcastVideo in Port RS-232C Port Service Input PortOverscan Satellite Broadcast
Related manuals
Manual 40 pages 52.21 Kb Manual 40 pages 48.75 Kb Manual 37 pages 18.65 Kb Manual 38 pages 20.38 Kb Manual 40 pages 32.12 Kb Manual 39 pages 19.59 Kb Manual 41 pages 3.78 Kb Manual 39 pages 31.46 Kb Manual 40 pages 45.06 Kb Manual 39 pages 17.03 Kb Manual 41 pages 55.43 Kb Manual 37 pages 25.87 Kb Manual 38 pages 55.13 Kb Manual 38 pages 58.44 Kb Manual 40 pages 59.39 Kb Manual 40 pages 57.72 Kb

SPA400BCX/EDC, SPA400BX/EDC specifications

Samsung SPA400BX/EDC and SPA400BCX/EDC models are advanced networked communication solutions designed for businesses seeking reliable and efficient communication tools. These products belong to the suite of Samsung's SPA series, which is known for its innovative features and robust performance.

One of the main features of the SPA400BX/EDC and SPA400BCX/EDC is their support for Voice over Internet Protocol (VoIP) technology. VoIP allows for high-quality voice communication over the internet, reducing long-distance call costs and enabling seamless connectivity. This feature is essential for businesses aiming to optimize their communication infrastructure while ensuring sound clarity and efficiency.

Another significant characteristic is the dual-mode support offered by these devices. They are compatible with both analog and digital phones, which provides flexibility for businesses that may have existing telephony infrastructure. This adaptability allows companies to gradually migrate to digital systems without incurring hefty expenses on new hardware.

The SPA400 series incorporates advanced call management features, such as call forwarding, voicemail, and auto-attendants. These features enhance the capability to handle high call volumes effectively, improving customer interaction and service quality. The user-friendly interface streamlines the configuration process, enabling easy setup and maintenance.

Furthermore, the SPA400BX/EDC and SPA400BCX/EDC boast built-in security features to protect sensitive data and communications. Encryption protocols and secure signaling help mitigate risks associated with VoIP, which is crucial in today's data-driven environment where cyber threats are prevalent.

Additionally, these models are designed to be energy-efficient, aligning with corporate sustainability goals. This characteristic not only helps reduce operational costs but also meets the growing demand for environmentally responsible technology solutions.

Overall, the Samsung SPA400BX/EDC and SPA400BCX/EDC represent a significant evolution in business communication technology. Their combination of VoIP support, dual-mode compatibility, advanced call management features, robust security, and energy efficiency makes them ideal for organizations looking to enhance their communication strategies. With comprehensive functionality and reliability, these models are poised to meet the dynamic needs of modern businesses.
Top Page Image Contents