Samsung PH64KRPMBF/NG, PH64KRRMBF/EN Rear, PC → DVI → AV → Hdmi → MagicInfo → Component → BNC

Introduction

[PC] → [DVI] → [AV] → [HDMI] → [MagicInfo] → [Component] → [BNC]

Enter button []

Activates a highlighted menu item.

Note

•This product is not compatible with MagicInfo.

MENU button [MENU]

Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu or return to the previous menu.

- VOL+

Moves from one menu item to another horizontally or adjusts selected menu val- ues. When OSD is not on the screen, push the button to adjust volume.

SEL

Moves from one menu item to another vertically or adjusts selected menu values.

Power button []

Use this button for turning the PDP Display on and off.

Power indicator

Shows PowerSaver mode by blinking green

Note

See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your PDP Display OFF when it is not needed or when leaving it unattended for long periods.

Remote Control Sensor

Aim the remote control towards this spot on the PDP Display.

Rear

Note

For detailed information concerning cable connections, refer to Connecting Cables under Setup. The PDP Display's configuration at the back may vary slightly depending on the PDP Display model.