Samsung LH46BLTQWC/EN, LH46BLTQWC/XY manual Auto Adjustment, Signal Balance

Adjusting the LCD Display

V-Position

MENU → → ENTER → [Picture] → → → → → ENTER → [Image Lock] → →

→ → ENTER → [V-Position]

→, → ENTER

Adjusts the screen location vertically.

Auto Adjustment

Note

•This function does not work for this LCD Display.

MENU → → ENTER → [Picture] → → → → → → ENTER → [Auto Adjustment ]

The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the control panel, the auto function is performed.

(Available in PC mode only)

(Not available in Dynamic Contrast mode of On.)

Note

The direct button on the remote control is the 'AUTO' button.

Signal Balance

Note

•This function does not work for this LCD Display.

This is used to make up for the weak RGB signal transmitted by a long signal cable.

MENU → → ENTER → [Picture] → → → → → → → ENTER → [Signal Bal- ance]

(Available in PC mode only)

(Not available in Dynamic Contrast mode of On.)

Signal Balance

MENU → → ENTER → [Picture] → → → → → → → ENTER → [Signal Bal- ance] → ENTER → [Signal Balance]