Samsung LH46BLTQWC/XY, LH46BLTQWC/EN manual Select Application step Select TCP/IP step

Adjusting the LCD Display

Please make sure not to use the Power-On option when the LCD Display is in the process of shutting down since this may cause system errors on the LCD Display.

•In the OSD image of MagicInfo, Network mode is the same as Device.

•When using MagicInfo with the MagicInfo Server Program: perform Network mode.

•When using MagicInfo with the device directly connected to LCD Display : execute Device mode.

•Press ALT + ESC to directly go to the MagicInfo Window screen.

•To setup MagicInfo on a Windows screen, a keyboard and mouse are required.

•To setup MagicInfo on a Windows screen, refer to the MagicInfo Server Help. It is highly recommended not to turn off the AC power during an operation.

•For pivoted LCD Displays, ticker transparency is not supported.

•For pivoted LCD Displays, a screen resolution of up to 720*480(SD) is supported for movies.

•For drive D:, EWF is not applied.

•When the contents of Setup have been changed when EWF is in the Enable state, to save the changes in the disk, you must Commit them.

•By selecting Disable, Enable or Commit, the system is restarted.

MagicInfo

1. Select Application - step 1

2. Select TCP/IP - step 2