Preventing afterimage burn-in
――The best way to protect the product from afterimage
•• Regular Text colour Change
––Use bright colours of similar brightness.
Interval: Change text colour and background colour every 30 minutes
limited depending on instruction guide.
•• Powering Off, Screen Saver and Power Saving Mode
––Power off the product for 2 hours after using it for12 hours.
––Go to Display Properties > Power Supply on your PC and set the product to power off as required.
––Using a screen saver is recommended.
It is best to use a
•• Regular colour Change
FLIGHT : TIME
OZ348 : 20:30
FLIGHT : TIME
OZ348 : 20:30
FLIGHT : TIME
OZ348 : 20:30
FLIGHT : TIME
OZ348 : 20:30
––Use 2 colours
Switch between 2 colours every 30 minutes as shown above.
––Move and change text every 30 minutes as shown below.
Type 1
FLIGHT | TIME |
OZ348 | 20:30 |
UA102 | 21:10 |
Type 2
|
|
|
|
|
| FLIGHT |
| TIME |
|
|
|
|
|
|
| OZ348 |
| 20:30 |
|
|
|
|
|
|
| UA102 |
| 21:10 |
|
|
|
|
|
|
[ Step 1 ] | [ Step 2 ] |
•• Avoid combinations of a text colour and background colour of contrasting brightness.
(Brightness: refers to the lightness or darkness of a colour which varies depending on the amount of light emitted.)
――Avoid using grey as it may contribute to afterimage
――Avoid using colours of contrasting brightness (black and white; grey).
FLIGHT | : | TIME | FLIGHT | : | TIME |
OZ348 | : | 20:30 | OZ348 | : | 20:30 |
[ Step 3 ]
––Regularly display a moving image along with a logo.
Interval: Display a moving image along with a logo for 60 seconds after using for 4 hours.