Samsung SHR-3010P/RUS manual System Information, Backup from Record Event List

DIGITAL VIDEO RECORDER

GBGB

System Information	11Backup Setting (SCSI HDD BACKUP)
10

The following illustrates the intial setting of the SYSTEM INFORMATION menu.

SYSTEM INFORMATION
	HDD1	HDD2
CAPACITY(GB)	80.00	NO
OVERWRITE(#)	00000	NO
VERSION	SHR301 3.11
MAC ADDRESS	ff-ff-ff-ff-ff-ff

●It displays the basic system information.

If the capacity for each (GB: Giga Byte) and the DISK END MODE of the RECORD MODE SETUP menu are set to CONTINUE, you can find out in the CAPACITY(GB) and OVERWRITE(#) the information about how many times a HDD is currently being overwritten.

VERSION indicates the software version installed on the system and MAC ADDRESS indicates the MAC Address entered in the system.

You shall connect this DVR to an external SCSI HDD with a connector to backup or replay the video or audio signal stored in the main body HDD. The external SCSI HDD is the only backup device of this DVR.

Here comes the BACKUP SETUP menu.

BACKUP SETUP

BACKUP FROM RECORD EVENT LIST

BACKUP FROM ALARM EVENT LIST

SEARCH & PLAY OF BACKUP
SCSI ERASE	OFF

BACKUP SETUP backups or replays the video or audio signal stored in the main body HDD in the external SCSI HDD through the SCSI.

(1)BACKUP FROM RECORD EVENT LIST

BACKUP FROM RECORD EVENT LIST is for backing up fromto back up using the record event list. Whenever the user presses the RECORD key in the HDD of the main unit to record, or records for long period of time, an event list is generated at the certain intervals of certain time. This function is for convenientis to backup of the chosen location, you want conveniently using the generatedis list. The Ffollowing screen shows the detailed setting forof BACKUP FROM RECORD EVENT LIST. It displays the Event (RECORD START), and the date and the time when it is recorded in the HDD. To exit this screen, press the MENU button. It will return to The MENU screen will reappear.

RECORD EVENT BACKUP [1/4]

ID EVENT DATE TIME

01 RECORD START 2003-04-02 13:29:50

02 RECORD START 2003-04-02 13:27:39

03 RECORD START 2003-04-02 12:54:30

04 RECORD START 2003-04-02 12:34:35

EXIT = [MENU] SELECT = [SET]

Use the JOG( ) or UP( ), DOWN( ) to move the cursor. The highlighted cursor will be displayed on the item selected. Move to the part of the EVENT LIST that you want to back up

and press the SET/STILL( ) button to display the screen. The following screen shows the example of selecting ID 0 2.

3-25 3-26