Samsung SCC-B2333BP, SCC-B2033P manual Motion, Dnr, Reduces the noise on the screen, Shutter, Off

How to use OSD Menu

‹AGC FIX‹

LEVEL[01]

￿ ￿ ￿

If you press the SETUP switch with a FIX sub menu selected, you will see the appropriate screen.

As a fixed value of the AGC gain is used in FIX mode, you can select one of the 16 detailed levels from VERY LOW to VERY HIGH before fixing it.

Note :

–If the DAY/NIGHT menu of the CAMERA SET is set to AUTO, the AGC menu will be deactivated.

–If FLICKERLESS is set to ON, the AGC FIX mode will be disabled.

❖ MOTION [S.SLOW, SLOW, NORM, FAST, F.FAST]

The MOTION menu is used to adjust the strength of the AGC level for a control of the camera motion. This is available only if the SENS-UP menu is set to AUTO.

You can select one from S.SLOW, SLOW, NORM, FAST and F.FAST for the AGC level.

If you monitor a fast moving object in a low contrast scene, select F.FAST while select S.SLOW for a hardly moving object in the same lighting condition.

Note :

–If the DAY/NIGHT menu of the CAMERA SET is set to AUTO, the MOTION menu will be deactivated.

❖ DNR [OFF,LOW,MID,HIGH, USER(1~16)]

You can configure the DNR (Digital Noise Reduction) related settings.

Reduces the noise on the screen.

This is especially useful for a severely distorted screen. You can set the level if you set DNR to USER.

❖SHUTTER

[OFF, AUTO 1/100(PAL:1/120), AUTO 1/250, AUTO 1/500, AUTO 1/1000, AUTO 1/2000, AUTO 1/4000, AUTO 1/10K , 1/100(PAL:1/120), 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10K , EXT]

The SHUTTER menu is used to set the fixed high-speed electronic shutter, auto high speed electronic shutter and external high speed electronic shutter(EXT).

You can select one of 7 options from 1/100(PAL:1/120) to 1/10K for the fixed high speed electronic shutter, which is mostly used for imaging a fast moving object.

The auto high speed electronic shutter operates as the fixed high speed shutter in a high contrast scene but automatically focuses the target if the iris opens fully in a low contrast scene like in ELC mode. When it gets brighter back, the mode will switch to the fixed high speed electronic shutter mode.

However, the auto high speed shutter operates properly only in a camera featuring a DC or VIDEO lens.

In external high speed electronic shutter (EXT) mode, you can select one of 8 modes from OFF through 1/100(PAL:1/120) to 1/10K for the high speed electronic shutter. It works as the high speed electronic shutter. You can select an option using SHUTTER(S0), SHUTTER(S1) and SHUTTER(S2) on the rear.

Connect each of the terminals to GND. See the below table for the operation.

SHUTTER(S0) SHUTTER(S1) SHUTTER(S2)

OFF
(NTSC: 1/60,	OFF	OFF	OFF
PAL:1/50)
1/100	ON	OFF	OFF
(PAL:1/120)
1/250	OFF	ON	OFF
1/500	ON	ON	OFF
1/1000	OFF	OFF	ON

18 – DIGITAL COLOR CAMERA