3Live Channel Selection and Audio On/Off Setup
In other split modes than Full Screen Mode and Auto Sequence Mode, you can choose a channel to be displayed in each split area on your own. In addition, the channel being set to Audio On can be turned to Audio On/Off in all Live Modes.
Audio On/Off Setup in the Full Screen
In full screen mode, the selected channel’s audio automatically turns on, and you can turn the audio on and off as you toggle the audio button. Depending on the Audio On/Off setup condition, the Audio icon of the channel changes to the Yellow/white color.
Audio On/Off Setup in the 16 Split Mode
If you press [ENTER] Button in the 16 Split Mode, the selection cursor in the following figure will appear and the channel concerned will be selected. When you select a temporary channel and press the audio button, you can turn the audio of the selected channel to on or off. Depending on the Audio On/Off setup condition, the Audio icon of the channel changes to the Yellow/white color. You can set audio from 1 to 4 channels in
CAM_01 CAM_02 CAM_03 CAM_04
CAM_05 CAM_06 CAM_07 CAM_08
CAM_09 CAM_10 CAM_11 CAM_12
CAM_13 CAM_14 CAM_15 CAM_16
Selecting channels in 4,6,7,8,and 9 split mode and PIP mode, and setting up Audio on/off.
As in 16 split mode, when pressing the [enter] button in 4,6,7,8, and 9 split mode and PIP mode it brings up the selecting cursor and selects the applied channel.
When you select a temporary channel, you can select the watched channel with the channel
According to the audio on/off setting environment, the audio icon of the applied channel changes to yellow/white.