Samsung SHR-2082P500, SHR-2160P, SHR-2080P, SHR-2162P750 manual 3Connecting the USB, 5English

SHR-2160/2162/2080/2082 USER’S MANUAL

3Connecting the USB

1.There are two USB connecting ports, on the front and other on the back of SHR-2160/2162/2080/2082.

2.USB Hard Disk, USB CD/DVD, and USB Memory may be connected through the front or through the back ports of SHR-2160/2162/2080/2082.

3.Only one USB device can be connected with each USB connecting port.

4.If the USB HDD is connected to the system, it should be detected and set through Menu - System - HDD setup before the operation.

5.Unit support HOT PLUG feature that allow the connection/removal of USB devices during the system operation.

Note

See 5-8 System (HDD Setup) of User’s Manual.

Caution

-Wait until the USB device connected by hot plug is stabilized enough and click CONNECT in SHR-2160/2162/2080/2082 MENU before use.

-USB port on the front and back of SHR-2160/2162/2080/2082 cannot be connected to same kinds of USB device. (For example, the case is that 2 CD-RW devices or 2 USB Memories are used by connection with the front and back of system.)

-If you use the USB Memory on SHR-2160/2162/2080/2082, it should be composed of the format being supported by SHR-2160/2162/2080/2082. Although you format it with FAT32 format on PC, it will be re-formatted, in case of (when) connecting with

SHR- 2160/2162/2080/2082.

Caution

- The hard disk of USB device should be set to Master.

3-5English