Samsung SMT-170MP manual Eng-14

	K. TALK
	Communicates with the doorbell in duplex mode.
K	L. Number Key(0 ~ 9)
	Press the number of the channel to watch it in full screen
	mode.
	Or, press the SYSTEM ID button and then press the
	number of the system you want to control with the remote
L	control.
	M. AUX CONTROL
	Outputs relay pulses to an external device for a specified
M	time.
	You can adjust this control according to your
	environment. (For example, when the doorbell rings, you
	can move to the corresponding camera and identify the
	visitor before opening the door using the AUX
	CONTROL button.)
N	N. ZOOM(TELE/WIDE)
	Only the remote control has this button. It is available
	only when a camera (SOC-420(P), SOC-920(P) sold
	separately) is connected to the system.
	O. SET
	Enters the selected Sub Menu from the Main Menu.
O	P. ZOOM
	When pressed in full screen mode, the screen is enlarged.
	Each press of this button enlarges the screen two and four
P	times sequentially and then returns to the normal size.
	Use the Rotary Wheel to move the Zoomed-in screen.
Q	Q. FREEZE
R
	Captures the selected screen as a still screen.
S
	R. SYSTEM ID
	Selects the system to control with the remote.
	Only the remote control has this button. With system ID button
	pressed, enter the desired number by pressing the corresponding
	button (0 to 9) to set up the Remote Control ID.
	S. ID RESET
	Located on the remote control, this button resets the
	selected System ID to the default ID (1).
	Note: For detailed function, see the MUX Box instruction
	provided.

Eng-14